Repositori institucional URV
Español Català English
TITLE:
Passive intensification of the ammonia absorption process with NH3/LiNO3 using carbon nanotubes and advanced surfaces in a tubular bubble absorber - imarina:5128696

URV's Author/s:Bourouis Chebata, Mahmoud / Vallès Rasquera, Joan Manel
Author, as appears in the article.:Amaris, Carlos; Bourouis, Mahmoud; Valles, Manel
Author's mail:mahmoud.bourouis@urv.cat
manel.valles@urv.cat
Author identifier:0000-0003-2476-5967
0000-0002-0748-1287
Journal publication year:2014
Publication Type:Journal Publications
APA:Amaris, Carlos; Bourouis, Mahmoud; Valles, Manel (2014). Passive intensification of the ammonia absorption process with NH3/LiNO3 using carbon nanotubes and advanced surfaces in a tubular bubble absorber. Energy, 68(), 519-528. DOI: 10.1016/j.energy.2014.02.039
Paper original source:Energy. 68 519-528
Abstract:The present study aims to quantify experimentally the individual and simultaneous effects of CNTs (carbon nanotubes) and advanced surfaces on the performance of an NH3/LiNO3 tubular bubble absorber. Operating conditions are those of interest for use in air-cooled absorption chillers driven by low temperature heat sources. Firstly, experimental tests were performed with the tubular absorber fitted with an inner smooth surface to analyze the effect of adding carbon nanotubes (0.01 wt%) to the base mixture NH3/LiNO3. Then, the tubular absorber was tested using an inner advanced surface tube both with and without adding carbon nanotubes to the base mixture NH3/LiNO3. The advanced surface tube is made of aluminum and has internal helical micro-fins measuring 0.3 mm in length. Results show that the maximum absorption mass flux achieved with the CNT binary nanofluid and the smooth tube is up to 1.64 and 1.48 times higher than reference values at cooling-water temperatures of 40 and 35 °C, respectively. It is also found that simultaneous use of CNT nanoparticles and advanced surfaces resulted in a more pronounced increase in the absorption mass flux and solution heat transfer coefficient with respect to the smooth tube absorber with NH3/LiNO3 as a working pair.
Article's DOI:10.1016/j.energy.2014.02.039
Link to the original source:https://www.sciencedirect.com/science/article/abs/pii/S036054421400173X
Paper version:info:eu-repo/semantics/acceptedVersion
licence for use:https://creativecommons.org/licenses/by/3.0/es/
Department:Enginyeria Mecànica
Licence document URL:https://repositori.urv.cat/ca/proteccio-de-dades/
Thematic Areas:Thermodynamics
Renewable energy, sustainability and the environment
Química
Pollution
Modeling and simulation
Medicina iii
Medicina ii
Mechanical engineering
Materiais
Management, monitoring, policy and law
Interdisciplinar
Industrial and manufacturing engineering
Geografía
Geociências
General energy
Fuel technology
Engineering, chemical
Engenharias iv
Engenharias iii
Engenharias ii
Engenharias i
Energy engineering and power technology
Energy (miscellaneous)
Energy (all)
Energy & fuels
Electrical and electronic engineering
Economia
Civil and structural engineering
Ciências ambientais
Ciências agrárias i
Ciência de alimentos
Ciência da computação
Building and construction
Biotecnología
Biodiversidade
Administração pública e de empresas, ciências contábeis e turismo
Keywords:Lithium nitrate
Carbon nanotubes
Bubble absorber
Ammonia
Advanced surfaces
Entity:Universitat Rovira i Virgili
Record's date:2024-09-07
Search your record at:

Available files
FileDescriptionFormat
DocumentPrincipalDocumentPrincipalapplication/pdf

Information

© 2011 Universitat Rovira i Virgili