|
A bibliometric analysis of trends in solar cooling technology
|
2020
|
| Absorption heat transformer- state-of-the-art of industrial applications | 2021 |
| Acetoacetate based thermosets prepared by dual-Michael addition reactions | 2019 |
| A Criterion for the Complete Deposition of Magnetic Beads on the Walls of Microchannels | 2016 |
| Actuator Behaviour of Tailored Poly(thiourethane) Shape Memory Thermosets | 2021 |
|
A data-driven framework for designing a renewable energy community based on the integration of machine learning model with life cycle assessment and life cycle cost parameters
|
2024
|
| A data-driven framework for designing a renewable energy community based on the integration of machine learning model with life cycle assessment and life cycle cost parameters | 2024 |
| A framework for sustainable evaluation of thermal energy storage in circular economy | 2021 |
|
A framework for the optimal integration of solar assisted district heating in different urban sized communities: A robust machine learning approach incorporating global sensitivity analysis
|
2020
|
| All-lignocellulosic Fiberboard from Steam Exploded Arundo Donax L. | 2018 |
| A Machine Learning decision-making tool for extubation in Intensive Care Unit patients | 2021 |
| Analysis and comparison of coupled and uncoupled simulations with the COAWST model during the Gloria Storm (January 2020) in the northwestern Mediterranean Sea | 2023 |
| Analysis of Aeroacoustic Properties of the Local Radial Point Interpolation Cumulant Lattice Boltzmann Method | 2021 |
| Analysis of ammonia/water and ammonia/salt mixture absorption cycles for refrigeration purposes in fishing ships | 2014 |
| Analysis of Poly(thiourethane) Covalent Adaptable Network through Broadband Dielectric Spectroscopy | 2023 |
| Analysis of the Use of Recycled Aluminum to Generate Green Hydrogen in an Electric Bicycle | 2023 |
| Analysis of Valorization Process of Aluminum Breakage Scraps to Obtain Green Hydrogen | 2021 |
|
A New Epoxy-Based Layered Silicate Nanocomposite Using a Hyperbranched Polymer: Study of the Curing Reaction and Nanostructure Development
|
2014
|
| An Inquiry into the Life Cycle of Systems of Inner Walls: Comparison of Masonry and Drywall | 2015 |
|
Anàlisi de les qualificacions obtingudes amb una estrategia docent ludificada: Cas pràctic en assignatures de l’àmbit de l’enginyeria mecànica
|
2021
|
|
Análisis de las tecnologías de almacenamiento de energía térmica dentro de la economía circular
|
2019
|
|
Análisis del curado dual en resinas epoxi mediante un molde instrumentado
|
2022
|
| Análisis de los diferentes tipos de desvulcanizado en la caracterización de nuevos materiales elastoméricos formados por la mezcla de estireno butadieno-caucho natural y mezclados con neumáticos fuera de uso (GTR) | 2017 |
| A Novel H2O/LiBr Absorption Heat Pump with Condensation Heat Recovery for Combined Heating and Cooling Production: Energy Analysis for Different Applications | 2023 |
| Application Properties Analysis as a Dielectric Capacitor of End-of-Life Tire-Reinforced HDPE | 2020 |
|
Approach for the analysis of TES technologies aiming towards a circular economy: Case study of building-like cubicles
|
2020
|
| Approaching Self-Bonded Medium Density Fiberboards Made by Mixing Steam Exploded Arundo donax L. and Wood Fibers: A Comparison with pMDI-Bonded Fiberboards on the Primary Properties of the Boards | 2023 |
| A real-time diagnostic tool for evaluating the thermal performance of nearly zero energy buildings | 2021 |
| A review of membrane contactors applied in absorption refrigeration systems | 2015 |
| A review of the fault behavior of heat pumps and measurements, detection and diagnosis methods including virtual sensors | 2021 |
| A Review on Thermoelectric Generators: Progress and Applications | 2020 |
|
A short communication on glocal universities
|
2016
|
|
Assessment of boiling heat transfer and pressure drop correlations of ammonia/water mixture in a plate heat exchanger
|
2012
|
| Bayesian Machine Scientist to Compare Data Collapses for the Nikuradse Dataset | 2020 |
| Binderless Fiberboards for Sustainable Construction. Materials, Production Methods and Applications | 2021 |
| Bio-based epoxy shape-memory thermosets from triglycidyl phloroglucinol | 2020 |
| Bio-inspired blades with local trailing edge flexibility increase the efficiency of vertical axis wind turbines | 2022 |
| Bio Oil as Cutter Stock in Fuel Oil Blends for Industrial Applications | 2023 |
| Boiling heat transfer and pressure drop of NH3/LiNO3 and NH3/(LiNO3 þ H2O) in a plate heat exchanger | 2016 |
| Boiling process assessment for absorption heat pumps: A review | 2021 |
| Carbon footprint of low-energy buildings in the United Kingdom: Effects of mitigating technological pathways and decarbonization strategies | 2023 |
|
CAREER MANAGEMENT TRAINING IN THE UNIVERSITY ENVIRONMENT
|
2022
|
| Catalytic pyrolysis of recycled polypropylene using a regenerated FCC catalyst | 2023 |
| Cephalic biomechanics underpins the evolutionary success of trilobites | 2021 |
| CFD simulation to investigate heat and mass transfer processes in a membrane-based absorber for water-LiSr absorption cooling systems | 2015 |
|
Challenges associated with the construction and operation of seasonal storage for A small solar district heating system: a multi-objective optimization approach
|
2021
|
| Chlorine Concentration Modelling and Supervision in Water Distribution Systems | 2022 |
| Common fault effects on a natural refrigerant, variable-speed heat pump | 2022 |
| Comparison between fully resolved and time-averaged simulations of particle cloud dispersion produced by a violent expiratory event | 2022 |
| Comparison of electrode position marking procedures on the cranial surface | 2023 |
| Comparison of Mechanical and Electrical Characteristics of Various Polymers Blended with Ground Tire Rubber (GTR) and Applications | 2019 |
|
Comparison of numerical and experimental performance criteria of an ammonia water bubble absorber using plate heat exchangers
|
2010
|
| COMPARISON OF THE MECHANICAL AND DIELECTRIC CHARACTERISTICS OF VARIOUS POLYMERS MIXED WITH GROUND TIRED RUBBER (GTR) FOR ITS APPLICATION AS INDUSTRIAL WORK FOOTWEAR INSULATOR | 2020 |
|
Comparison of the nanostructure and mechanical performance of highly exfoliated epoxy-clay nanocomposites prepared by three different protocols
|
2014
|
|
Conceptual and instrumental influences in the graphic representation of urban planning during the 20th century
|
2015
|
|
Conceptual and instrumental influences in the graphic representation of urban planning: From ancient times to the baroque
|
2014
|
|
Conceptual and instrumental influences in the graphic representation of urban planning: The industrial revolution and the 19th century
|
2015
|
| Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR) | 2022 |
| Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks | 2021 |
| Delta wing design in earliest nektonic vertebrates | 2024 |
| Design and assembly of biodegradable capsules based on alginate hydrogel composite for the encapsulation of blue dye | 2023 |
| Design and characterization of a novel finned tubular thermoelectric generator for waste heat recovery | 2022 |
| Determination of Thermodynamic Parameters of Polylactic Acid by Thermogravimetry under Pyrolysis Conditions | 2021 |
| Determination of the thermodynamic parameters of the pyrolysis process of post-consumption thermoplastics by non-isothermal thermogravimetric analysis | 2021 |
| Development of optical digital interferometry for visualizing and modelling the mass diffusion of ammonia in water in an absorption process | 2022 |
| Dielectric characterization and analysis of linear low-density polyethylene (LLDPE) compounds mixed with out-of-use tire particles (GTR) | 2021 |
| Dielectric Properties in Oriented and Unoriented Membranes Based on Poly(Epichlorohydrin-co-Ethylene Oxide) Copolymers: Part III | 2022 |
| Direct numerical simulation of the fully developed turbulent free convection flow in an asymmetrically heated vertical channel | 2023 |
| Direct numerical simulation of the turbulent flow generated during a violent expiratory event | 2021 |
| Direct numerical simulation of turbulent dispersion of evaporative aerosol clouds produced by an intense expiratory event | 2021 |
| Disulfide vitrimeric materials based on cystamine and diepoxy eugenol as bio-based monomers | 2023 |
|
Drawing the 'Boundaries', the Start of an Urban Planning Project
|
2017
|
| Dual-cured thermosets from glycydil methacrylate obtained by epoxy-amine reaction and methacrylate homopolymerization | 2021 |
|
Easements and protected areas: Problems and evolution of their graphic representation on urban development and civil engineering drawings
|
2016
|
|
Economic Optimization of the Energy Supply for a Logistics Center Considering Variable-Rate Energy Tariffs and Integration of Photovoltaics
|
2019
|
| Effect of advanced surfaces on the ammonia absorption process with NH 3/LiNO3 in a tubular bubble absorber | 2014 |
|
Effect of operating conditions on the performance of the bubble pump of absorption-diffusion refrigeration cycles
|
2011
|
| Effect of Selected Thiols on Cross-linking of Acrylated Epoxidized Soybean Oil and Properties of Resulting Polymers | 2018 |
| Effect of solid particles on the slug frequency, bubble velocity and bubble length of intermittent gas–liquid two-phase flows in horizontal pipelines | 2022 |
| Effect of the network structure and programming temperature on the shape-memory response of thiol-epoxy 'click' systems | 2015 |
| Effects of upper respiratory tract anatomy and head movement on the buoyant flow and particle dispersion generated in a violent expiratory event | 2022 |
| Electro-responsive shape-memory composites obtained via dual-curing processing | 2022 |
|
Elucidating Paralouatta's semi-terrestriality using the virtual morpho-functional toolbox
|
2020
|
| Embodied energy in thermal energy storage (TES) systems for high temperature applications | 2015 |
| Energy Analysis of Control Measures for Reducing Aerosol Transmission of COVID‐19 in the Tourism Sector of the “Costa Daurada” Spain | 2022 |
| Energy efficiency and thermal comfort of buildings in arid climates employing insulating material produced from date palm waste matter | 2023 |
| Enhancement in the Glass Transition Temperature in Latent Thiol-Epoxy Click Cured Thermosets | 2015 |
| Enhancement of 3D-printable materials by dual-curing procedures | 2021 |
| Enhancement of Epoxy Thermosets with Hyperbranched and Multiarm Star Polymers: A Review | 2022 |
| Epoxy-Based Shape-Memory Actuators Obtained via Dual-Curing of Off-Stoichiometric 'Thiol-Epoxy' Mixtures | 2017 |
| Estimation of differential heat of dilution for aqueous lithium (bromide, iodide, nitrate, chloride) solution and aqueous (lithium, potassium, sodium) nitrate solution used in absorption cooling systems | 2016 |
| Euler-Euler large eddy simulations of the gas–liquid flow in a cylindrical bubble column | 2020 |
|
Europa, l'esperança del món
|
2015
|
| Evaluation of Empirical Daily Solar Radiation Models for the Northeast Coast of the Iberian Peninsula | 2023 |
| Evaluation of the beam-F3 method for locating the F3 position from the 10-20 international system | 2022 |
|
Experimental Analysis of Gas-Liquid-Solid Three-Phase Flows in Horizontal Pipelines
|
2020
|
| Experimental and numerical investigation of the flow in a cylindrical cavity with an unsteady rotating lid | 2022 |
| Experimental characterization of heat and mass transfer in a horizontal tube falling film absorber using aqueous (lithium, potassium, sodium) nitrate solution as a working pair | 2018 |
|
Experimental investigation on the flow behaviour in a bubble pump of diffusion absorption refrigeration systems
|
2016
|
| Experimental investigation on the flow behaviour in a bubble pump of diffusion absorption refrigeration systems | 2016 |
| Experimental investigations and modelling of a small capacity diffusion-absorption refrigerator in dynamic mode | 2017 |
|
Experimental studies on bubble pump operated diffusion absorption machine based on light hydrocarbons for solar cooling
|
2010
|
|
Experimental study of an ammonia/water bubble absorber using a plate heat exchanger for absorption refrigeration machines
|
2009
|
| Experimental study of the deposition of magnetic particles on the walls of microchannels | 2021 |
| Feasibility limits and performance of an absorption cooling machine using light alkane mixtures | 2015 |
| Feasibility study and environmental impact of using a photovoltaic system to secure relays of mobile communication systems | 2021 |
| Feasibility study and performance evaluation of low capacity water-LiBr absorption cooling systems functioning in different Algerian climate zones | 2017 |
| Feasibility study of a wind-photovoltaic hybrid power generation system for a remote area in the extreme south of Algeria | 2016 |
|
Finite element analysis of individual taenioglossan radular teeth (Mollusca)
|
2020
|
| Finite element analysis relating shape, material properties, and dimensions of taenioglossan radular teeth with trophic specialisations in Paludomidae (Gastropoda) | 2021 |
|
Finite element modelling of sound transmission in the Weberian apparatus of zebrafish (Danio rerio)
|
2024
|
| Finite element modelling of sound transmission in the Weberian apparatus of zebrafish (Danio rerio) | 2024 |
|
Flexible heat pump integration to improve sustainable transition toward 4th generation district heating
|
2020
|
|
Flow analysis of a set of ornamental chimney caps designed by Antoni Gaudi
|
2020
|
|
Flow boiling heat transfer of ammonia/water mixture in a plate heat exchanger
|
2010
|
| Framework for a Systematic Parametric Analysis to Maximize Energy Output of PV Modules Using an Experimental Design | 2019 |
|
From layout to photoplan: reflections on the 'representation' of urban planning.
|
2017
|
| From Supramolecular Hydrogels to Multifunctional Carriers for Biologically Active Substances | 2021 |
| Fully-resolved numerical simulations of the turbulent flow and particle deposition in a cubical cavity with two pairs of differentially heated opposed walls at Rayleigh number 3.6 × 109 | 2023 |
| FUNCTIONAL LAND AND EMOTIONAL LANDSCAPE. DRY STONE CONSTRUCTIONS IN LA GARRIGA D'EMPORDA IN THE 19TH CENTURY | 2021 |
|
Fungal planet description sheets: 154-213
|
2013
|
| GEOGRAPHY AND THE IRREGULAR MODERN FORTRESS CITY (GIRONA 18TH AND 19TH CENTURIES) | 2020 |
|
Geometric characterization of the rotation centers of a particle in a flow
|
2016
|
| Getting Its Feet on the Ground: Elucidating Paralouatta’s Semi-Terrestriality Using the Virtual Morpho-Functional Toolbox | 2020 |
| Ground tire rubber recycling in applications as insulators in polymeric compounds, according to spanish une standards | 2020 |
|
Heat and mass transfer in a bubble plate absorber with NH 3/LiNO 3 and NH 3/(LiNO 3 + H 2O) mixtures
|
2013
|
| High Mechanical Performance Boards Made from fibers of Arundo donax without added adhesives | 2017 |
|
Hybrid system and environmental evaluation: Case house in south of Algeria
|
2013
|
| Hydrodynamics of a rigid stationary flat plate in cross-flow near the free surface | 2019 |
|
Identifying the effects of heat treatment temperatures on the Ti50Ni45Cu5 alloy using dynamic mechanical analysis combined with microstructural analysis
|
2018
|
| Impact of the solution channel thickness while investigating the effect of membrane characteristics and operating conditions on the performance of water-LiBr membrane-based absorbers | 2016 |
|
Implementation of elements of sustainability applied to the modernization of productive areas: Spain, a case of technological deficiency in southern Europe [Implantación de elementos de sostenibilidad aplicados a la modernización de áreas productivas:
|
2017
|
|
Implementation of elements of sustainability applied to the urbanization of productive areas
|
2016
|
| Influence of Design Parameters in the Optimization of Linear Switched Reluctance Motor under Thermal Constraints | 2018 |
| Influence of Heat Treatment on Internal Friction Spectrum in NiTiCu Shape Memory Alloy | 2015 |
| Influence of silver nanoparticles morphologies on density, viscosity and thermal conductivity of silver nanofluids and silver ionanofluids | 2018 |
| Influence of tire rubber particles addition in different branching degrees polyethylene matrix composites on physical and structural behavior | 2021 |
| Influence of Ventilation Openings on the Energy Efficiency of Metal Frame Modular Constructions in Brazil Using BIM | 2023 |
|
Influencia en las propiedades mecánicas de varios compuestos poliméricos reforzados con partículas de GTR
|
2019
|
| Insights into the Structural and Dielectric Behavior of Composites Produced from EPDM Waste Processed through a Devulcanization Method and SBR | 2023 |
| Integration of a heating and cooling system driven by solar thermal energy and biomass for a greenhouse in Mediterranean climates | 2023 |
|
Integration of reversible heat pumps in trigeneration systems for low-temperature renewable district heating and cooling microgrids
|
2019
|
| Integration of Solar Photovoltaic Systems into Power Networks: A Scientific Evolution Analysis | 2022 |
|
Integrative analysis reveals novel pathways mediating the interaction between adipose tissue and pancreatic islets in obesity in rats
|
2014
|
|
Investigation of an ejector powered double-effect absorption/recompression refrigeration cycle
|
2019
|
|
ISS quasi-steady accelerometric data as a tool for the detection of external disturbances during the period 2009-2016.
|
2018
|
| ISS Quasi-steady Accelerometric Data as a Tool for the Detection of External Disturbances During the Period 2009-2016 | 2018 |
|
Key performance indicators (KPIs): Assessing the process integration of a shell-and-tube latent heat storage unit
|
2020
|
| Large field Digital Image Plane Holography with a double cavity high speed laser | 2022 |
| Lesser mealworm (A. diaperinus) protein as a replacement for dairy proteins in the production of O/W emulsions: Droplet coalescence studies using microfluidics under controlled conditions | 2023 |
|
Life Cicle Inventory for Lead Azide Manufacture
|
2014
|
| Life cicle inventory for lead azide manufacture | 2014 |
|
Life Cycle Assessment of alveolar brick construction system incorporating phase change materials (PCMs)
|
2013
|
|
Life Cycle Impact Assessment of masonry system as inner walls: A case study in Brazil
|
2014
|
|
Lipids, biomarkers, and subclinical atherosclerosis in treatment-naive HIV patients starting or not starting antiretroviral therapy: Comparison with a healthy control group in a 2-year prospective study
|
2020
|
| Low-energy buildings in combination with grid decarbonization, life cycle assessment of passive house buildings in Northern Ireland | 2022 |
| Methodology for the Prediction of the Thermal Conductivity of Concrete by Using Neural Networks | 2024 |
| Microparticle size and quantities effect on the mechanical features of end of life tires in thermoplastic composites | 2020 |
| Modeling and Dynamic Simulation of a Hybrid Liquid Desiccant System with Non-Adiabatic Falling-Film Air-Solution Contactors for Air Conditioning Applications in Buildings | 2021 |
| Modeling and Optimal Control Applying the Flower Pollination Algorithm to Doubly Fed Induction Generators on a Wind Farm in a Hot Arid Climate | 2021 |
|
Modeling of a cogeneration system with a micro gas turbine operating at partial load conditions
|
2017
|
|
Modeling of a cogeneration system with a micro gas turbine operating at partial load conditions
|
2017
|
| Modeling of boiling two-phase flow in the bubble pump of diffusion-absorption refrigeration cycles | 2015 |
| Modelling and testing the performance of a commercial ammonia/water absorption chiller using ASPEN-Plus platform | 2015 |
|
Modelling of heat flux received by a bubble pump of absorption-diffusion refrigeration cycles
|
2011
|
| Modelling the performance parameters of a horizontal falling film absorber with aqueous (lithium, potassium, sodium) nitrate solution using artificial neural networks | 2016 |
| Molar heat capacities of the mixture {1,8-cineole + ethanol} at several temperatures and atmospheric pressure | 2016 |
|
Molecular dynamics algorithm enforcing energy conservation for microcanonical simulations
|
2014
|
| Motion control in free-standing shape-memory actuators | 2018 |
| Multi-objective optimisation of bio-based thermal insulation materials in building envelopes considering condensation risk | 2018 |
|
Multi-objective optimization coupled with life cycle assessment for retrofitting buildings
|
2014
|
| Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH): Phase I: Segmentation | 2018 |
| NATURAL GEOGRAPHY AND DISPERSE URBAN DEVELOPMENT. RESIDENTIAL DEVELOPMENTS ON MOUNT MONTJUIC IN BARCELONA IN THE NINETEENTH CENTURY | 2020 |
| Network structure dependence on unconstrained isothermal-recovery processes for shape-memory thiol-epoxy 'click' systems | 2017 |
| New approach in the reuse of modified ground tire rubber as thermal and acoustic insulation to be used in civil engineering | 2023 |
|
New Developments and Progress in Absorption Chillers for Solar Cooling Applications
|
2020
|
| New epoxy composite thermosets with enhanced thermal conductivity and high Tg obtained by cationic homopolymerization | 2018 |
| NiTiCu Transverse to Axial Strain Ratio Analysis During Tension/Compression Tests | 2015 |
| Novel bio-based epoxy thermosets based on triglycidyl phloroglucinol prepared by thiol-epoxy reaction | 2020 |
|
Novel BN-epoxy/anhydride composites with enhanced thermal conductivity
|
2021
|
| Novel hybrid organic/inorganic poly(thiourethane) covalent adaptable networks | 2022 |
| Numerical analysis of n-octadecane melting process in a rectangular cell under reboosting maneuver conditions | 2024 |
|
Numerical investigation of an absorption-diffusion cooling machine using C3H8/C9H20 as binary working fluid [Étude numérique d\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
|
2013
|
|
Numerical investigation of void fraction distribution for comparative analysis of flow patterns repartition in thermal driven bubble pumps
|
2019
|
|
Numerical prediction of flow patterns in bubble pumps
|
2011
|
| Numerical simulations of the flow and aerosol dispersion in a violent expiratory event: Outcomes of the 2022 International Computational Fluid Dynamics Challenge on violent expiratory events | 2023 |
| One step further in biomechanical models in palaeontology: a nonlinear finite element analysis review | 2022 |
| On the drag reconfiguration of plates near the free surface | 2019 |
|
On the Monitoring of the Vibratory Environment of DCMIX4 Campaign. Preliminary Results
|
2020
|
|
Optimization of the geometrical parameters of a solar bubble pump for absorption-diffusion cooling systems
|
2010
|
| Optimized demand side management (DSM) of peak electricity demand by coupling low temperature thermal energy storage (TES) and solar PV | 2018 |
| Orthodontic Loads in Teeth after Regenerative Endodontics: A Finite Element Analysis of the Biomechanical Performance of the Periodontal Ligament | 2022 |
| Overview of the Potential of Energy Harvesting Sources in Electric Vehicles | 2023 |
|
Parametric Study of an Earth-Air Heat Exchanger Assisted by a Green Wall for Passive Cooling in Hot Climates
|
2020
|
| Particle fractionation controls Escherichia coli release from solid manure | 2021 |
| Part-load cahracteristics of a new ammonia/lithium nitrate absorption chiller [Caractéristiques à charge partielle d'un nouveau refroidisseur à absorption ammoniac/nitrate de lithium] | 2015 |
| Passive intensification of the ammonia absorption process with NH3/LiNO3 using carbon nanotubes and advanced surfaces in a tubular bubble absorber | 2014 |
| Passive scalar transfer rate at bubble interface in Carreau liquid in a transition regime | 2022 |
|
Performance Analysis of a Cascading Adsorption Cycle Powered by High-Temperature Heat Sources for Low-Temperature Cooling in Hot Climates
|
2020
|
| PERFORMANCE ANALYSIS OF A MICRO HEAT EXCHANGER IN ELECTRONIC COOLING APPLICATIONS | 2021 |
| Performance analysis of a triple-effect absorption cooling cycle using aqueous (lithium, potassium, sodium) nitrate solution as a working pair | 2015 |
| Performance Analysis of Low-Capacity Water–LiBr Absorption–Cooling Systems Using Geothermal Heat-Sinks in Hot Climates | 2023 |
| Performance assessment of a 20 MW photovoltaic power plant in a hot climate using real data and simulation tools | 2021 |
| Performance assessment of an NH3/LiNO3 bubble plate absorber applying a semi-empirical model and artificial neural networks | 2020 |
| Performance evaluation of membrane-based absorbers employing H2O/(LiBr + LiI + LiNO3 + LiCl) and H2O/(LiNO3 + KNO3 + NaNO3) as working pairs in absorption cooling systems | 2016 |
|
Phenomenological characterization of sequential dual-curing of off-stoichiometric "thiol-epoxy" systems: Towards applicability
|
2017
|
| Phenomenological characterization of sequential dual-curing of off-stoichiometric “thiol-epoxy” systems: Towards applicability | 2017 |
| Pitching foil propulsion performance decays near the free surface | 2023 |
| Power production using a batch double-chamber microbial fuel cell from brewery wastewater: Effects of electron acceptors | 2022 |
| Pre-industrial development and experimental characterization of new air-cooled and water-cooled ammonia/lithium nitrate absorption chillers | 2014 |
| Preparation and Characterization of a Series of Self-Healable Bio-Based Poly(thiourethane) Vitrimer-like Materials | 2023 |
| Preparation of new biobased materials from a triglycidyl eugenol derivative through thiol-epoxy click reaction | 2018 |
| Production and Analysis of the Physicochemical Properties of the Pyrolytic Oil Obtained from Pyrolysis of Different Thermoplastics and Plastic Mixtures | 2022 |
| Real-World Variability in the Prediction of Intracranial Aneurysm Wall Shear Stress: The 2015 International Aneurysm CFD Challenge | 2018 |
| Recovery and Transport of Industrial Waste Heat for Their Use in Urban District Heating and Cooling Networks Using Absorption Systems | 2020 |
| Recyclable and Reprocessable Epoxy Vitrimer Adhesives | 2023 |
| Recyclable organocatalyzed poly(Thiourethane) covalent adaptable networks | 2020 |
| Recyclable poly(thiourethane) vitrimers with high Tg. Influence of the isocyanate structure | 2020 |
| Regasification of liquefied natural gas in satellite terminals: Techno-economic potential of cold recovery for boosting the efficiency of refrigerated facilities | 2021 |
|
Rheological and mechanical characterization of dual-curing thiol-acrylate-epoxy thermosets for advanced applications
|
2019
|
| Scheduling optimization and risk analysis for energy-intensive industries under uncertain electricity market to facilitate financial planning | 2023 |
|
Sequential curing of off-stoichiometric thiol-epoxy thermosets with a custom-tailored structure
|
2016
|
| Sequential photo-thermal curing of (meth)acrylate-epoxy thiol formulations | 2021 |
| Shape evolution of long flexible fibers in viscous flows | 2022 |
| Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets | 2021 |
|
Solutal natural convection flows in ternary mixtures
|
2016
|
| Solutal natural convection flows in ternary mixtures | 2017 |
|
Some considerations on the vibrational environment of the DSC-DCMIX1 experiment onboard ISS
|
2016
|
|
Some considerations on the vibrational environment of the DSC-DCMIX1 experiment onboard ISS
|
2016
|
|
Stabilized rammed earth incorporating PCM: Optimization and improvement of thermal properties and Life Cycle Assessment
|
2012
|
| Steady state investigations of a commercial diffusion-absorption refrigerator: Experimental study and numerical simulations | 2018 |
|
Stone sawing machine at the Temple of Artemis in Jerash, Jordan
|
2023
|
| Structural and mechanical analysis on mannuronate-rich alginate gels and xerogels beads based on Calcium, Copper and Zinc as crosslinkers | 2023 |
| Structural and physico-mechanical properties of natural rubber/GTR composites devulcanized by microwaves: Influence of GTR source and irradiation time | 2018 |
| Structural reversible adhesives based on thiol-epoxy vitrimers | 2023 |
| Study analysis of thermal, dielectric and functional characteristics of an ethylene polyethylene diene monomer blended with end-of-life tire microparticles amounts | 2021 |
| Study and Characterization of the Dielectric Behavior of Low Linear Density Polyethylene Composites Mixed with Ground Tire Rubber Particles | 2020 |
| Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites | 2020 |
|
Subcutaneous phaeohyphomycosis due to Phialemoniopsis ocularis successfully treated by voriconazole
|
2014
|
| Sustainability insights on emerging solar district heating technologies to boost the nearly zero energy building concept | 2021 |
|
Swimming and feeding in the Ordovician trilobite Microparia speciosa shed light on the early history of nektonic life habit
|
2023
|
|
Synchronization of life cycles by collective transport and emergence of supercycles
|
2020
|
| Synthesis and characterization of new bio-based poly(acylhydrazone) vanillin vitrimers | 2022 |
| Systematic combination of insulation biomaterials to enhance energy and environmental efficiency in buildings | 2021 |
| Technical, environmental, and economic evaluation of a solar/gas driven absorption chiller for shopping malls in the Caribbean region of Colombia | 2022 |
| Techno-economic analysis of control strategies for heat pumps integrated into solar district heating systems | 2021 |
| Techno-economic analysis of residential rooftop photovoltaics in Spain | 2023 |
|
Testing the Reliability of Flexible MOX Gas Sensors under Strain
|
2019
|
|
The 'Base map' for urban planning: cartographic representation as a fundamental tool for the representation of the town plan.
|
2018
|
| The effect of lignin as a natural adhesive on the physico-mechanical properties of vitis vinifera fiberboards | 2011 |
| The Impact of an International Component in Educating the Public Using an Experimental Design | 2021 |
|
Theoretical study of a novel oil-free co-rotating scroll compressor integrated into a hybrid absorption heat pump cycle
|
2016
|
|
The Potential of Solar Thermoelectric Generator STEG for Implantation in the Adrar Region
|
2020
|
| Thermal and mechanical characterization of EMA-TEGDMA mixtures for cosmetic applications | 2018 |
| Thermal and Surface Radiosity Analysis of an Underfloor Heating System in a Bioclimatic Habitat | 2021 |
| Thermoconductive Thermosetting Composites Based on Boron Nitride Fillers and Thiol-Epoxy Matrices | 2018 |
| The use of click-type reactions in the preparation of thermosets | 2020 |
| The use of lanthanide triflates in the preparation of poly(thiourethane) covalent adaptable networks | 2023 |
| Transient large-scale two-phase flow structures in a 3D bubble column reactor | 2020 |
| Transport and wall surface deposition of airborne particles in enclosed, buoyancy-driven turbulent flows using fully-resolved numerical simulations | 2022 |
| Tribological Behavior of Microalloyed Cu50Zr50 Alloy | 2022 |
| URBAN RECREATIONAL PARKS TO OFFSET THE FLOODING OF RIVERS: LA DEVESA OF GIRONA -CATALONIA- (19TH CENTURY) | 2020 |
| Use of operational research techniques for concrete mix design: A systematic review | 2023 |
| Use of thermoelectric generators to harvest energy from motor vehicle brake discs | 2021 |
| Using Machine Learning to estimate the impact of different modes of transport and traffic restriction strategies on urban air quality | 2022 |
|
Utility networks in urban planning plans: Evolution of its graphic representation
|
2014
|
|
Vapor-Liquid Equilibrium of Aqueous Alkaline Nitrate and Nitrite Solutions for Absorption Refrigeration Cycles with High-Temperature Driving
|
2011
|
| Vapour absorption enhancement using passive techniques for absorption cooling/heating technologies: A review | 2018 |
| Vertically downward gas-liquid flow: Void fraction and pressure drop | 2024 |
|
Visualization and measurement of two-phase flows in horizontal pipelines
|
2020
|
| Vitrimeric Epoxy-Amine Polyimine Networks Based on a Renewable Vanillin Derivative | 2022 |
| Waste Aluminum Application as Energy Valorization for Hydrogen Fuel Cells for Mobile Low Power Machines Applications | 2021 |
Repositori URV