Articles producció científica> Enginyeria Mecànica

Modeling of a cogeneration system with a micro gas turbine operating at partial load conditions

  • Dades identificatives

    Identificador: PC:2601
  • Autors:

    Coronas, A.
    Dutra, J.C.
    Gonzalez-Carmona, M.A.
    Lazaro-Alvarado, A.F.
  • Altres:

    Autor segons l'article: Coronas, A.; Dutra, J.C.; Gonzalez-Carmona, M.A.; Lazaro-Alvarado, A.F.
    Departament: Enginyeria Mecànica
    Autor/s de la URV: CORONAS SALCEDO, ALBERTO; Dutra, J.C.; Gonzalez-Carmona, M.A.; Lazaro-Alvarado, A.F.
    Paraules clau: Micro gas turbines Absorption chiller
    Resum: The integration of absorption chillers in micro-cogeneration systems based on micro-gas turbines can be useful as an appropriate strategy to increase the total system energy efficiency. Since it is an area intensive in technology, it is necessary to develop and use models of simulation, which can predict the behavior of the whole system and of each component individually, at different operating conditions. This work is part of a research project in high efficiency cogeneration systems, whose purpose at this stage is to model a micro-cogeneration system, which is composed of a micro gas turbine, Capstone C30, a compact cross flow finned tube heat exchanger and an absorption chiller. The entire model is composed of specifically interconnected models, developed and validated for each component. The simulation of the microturbine used a thermodynamic analytic model, which contains a procedure used to obtain the micro turbine characteristic performance curves, which is closed with the thermodynamic Brayton cycle model. In the cogeneration system discussed in this paper, the compact heat exchanger was used to heat thermal oil, which drives an absorption chiller. It was designed, characterized and installed in a cogeneration system installed at the Centre d'Innovació Tecnològica en Revalorització Energètica i Refrigeració, Universtat Rovira i Virgili. Its design led to the heat exchanger model, which was coupled with the micro turbine model. Presented in this work is a comparison between the data from the model and the experiments, demonstrating good agreement between both results.
    Grup de recerca: CREVER-Grup Enginyeria Tèrmica Aplicada
    Àrees temàtiques: Mechanical engineering Ingeniería mecánica Enginyeria mecànica
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 1848-9257
    Identificador de l'autor: 0000-0002-6109-3680; n/a; n/a; n/a
    Data d'alta del registre: 2017-03-07
    Pàgina final: 150
    Volum de revista: 5
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Enllaç font original: http://www.sdewes.org/jsdewes/pid5.0138
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    DOI de l'article: 10.13044/j.sdewes.d5.0138
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2017
    Pàgina inicial: 139
    Tipus de publicació: Article Artículo Article
  • Paraules clau:

    Termotècnia
    Turbines de gas
    Micro gas turbines
    Absorption chiller
    Mechanical engineering
    Ingeniería mecánica
    Enginyeria mecànica
    1848-9257
  • Documents:

  • Cerca a google

    Search to google scholar