Articles producció científica> Enginyeria Mecànica

Modelling of heat flux received by a bubble pump of absorption-diffusion refrigeration cycles

  • Dades identificatives

    Identificador: imarina:5127573
    Handle: https://hdl.handle.net/20.500.11797/imarina5127573
    Autors:
    Benhmidene AChaouachi BGabsi SBourouis M
    Resum:
    In the present study, the heat flux received by a bubble pump, which was simulated to a vertical tube 1 m long and with a variable diameter, was optimized. A numerical study was carried out in order to solve balance equations concerning the water-ammonia mixture in the up flow. The two-fluid model was used to derive the equations. A numerical study was carried out on a heat flux between 1 and 70 kW m−2 and the liquid velocity was determined. The optimum flux was determined for a tube diameter equal to 4, 6, 8 and 10 mm and a mass flow rate ranging from 10 to 90 kg m−2 s−1. The optimum heat flux was correlated as a function of the tube diameter and mass flow rate, while the minimum heat flux required for pumping was correlated as a function of the tube diameter.

  • Altres:

    Autor segons l'article: Benhmidene A; Chaouachi B; Gabsi S; Bourouis M
    Departament: Enginyeria Mecànica
    Autor/s de la URV: Bourouis Chebata, Mahmoud
    Paraules clau: System Performance Fluids 2-phase flow
    Resum: In the present study, the heat flux received by a bubble pump, which was simulated to a vertical tube 1 m long and with a variable diameter, was optimized. A numerical study was carried out in order to solve balance equations concerning the water-ammonia mixture in the up flow. The two-fluid model was used to derive the equations. A numerical study was carried out on a heat flux between 1 and 70 kW m−2 and the liquid velocity was determined. The optimum flux was determined for a tube diameter equal to 4, 6, 8 and 10 mm and a mass flow rate ranging from 10 to 90 kg m−2 s−1. The optimum heat flux was correlated as a function of the tube diameter and mass flow rate, while the minimum heat flux required for pumping was correlated as a function of the tube diameter.
    Àrees temàtiques: Thermodynamics Química Mechanics Matemática / probabilidade e estatística Fluid flow and transfer processes Engenharias iii Engenharias ii Condensed matter physics Ciências ambientais Ciências agrárias i Ciência de alimentos Biotecnología
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: mahmoud.bourouis@urv.cat
    Identificador de l'autor: 0000-0003-2476-5967
    Data d'alta del registre: 2023-02-18
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    Enllaç font original: https://link.springer.com/article/10.1007/s00231-011-0799-3
    Referència a l'article segons font original: Heat And Mass Transfer. 47 (11): 1341-1347
    Referència de l'ítem segons les normes APA: Benhmidene A; Chaouachi B; Gabsi S; Bourouis M (2011). Modelling of heat flux received by a bubble pump of absorption-diffusion refrigeration cycles. Heat And Mass Transfer, 47(11), 1341-1347. DOI: 10.1007/s00231-011-0799-3
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    DOI de l'article: 10.1007/s00231-011-0799-3
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2011
    Tipus de publicació: Journal Publications

  • Paraules clau:

    Condensed Matter Physics,Fluid Flow and Transfer Processes,Mechanics,Thermodynamics
    System
    Performance
    Fluids
    2-phase flow
    Thermodynamics
    Química
    Mechanics
    Matemática / probabilidade e estatística
    Fluid flow and transfer processes
    Engenharias iii
    Engenharias ii
    Condensed matter physics
    Ciências ambientais
    Ciências agrárias i
    Ciência de alimentos
    Biotecnología

  • Documents:

    DocumentPrincipal

  • Cerca a google

    Search to google scholar