Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Backscatter Transponder Based on Frequency Selective Surface for FMCW Radar Applications

  • Dades identificatives

    Identificador: imarina:5127984
    Handle: https://hdl.handle.net/20.500.11797/imarina5127984
    Autors:
    Lazaro, AntonioLorenzo, JavierVillarino, RamonGirbau, David
    Resum:
    This paper describes an actively-controlled frequency selective surface (FSS) to implement a backscatter transponder. The FSS is composed by dipoles loaded with switching PIN diodes. The transponder exploits the change in the radar cross section (RCS) of the FSS with the bias of the diodes to modulate the backscattered response of the tag to the FMCW radar. The basic operation theory of the system is explained here. An experimental setup based on a commercial X-band FMCW radar working as a reader is proposed to measure the transponders. The transponder response can be distinguished from the interference of non-modulated clutter, modulating the transponder's RCS. Some FSS with different number of dipoles are studied, as a proof of concept. Experimental results at several distances are provided.

  • Altres:

    Autor segons l'article: Lazaro, Antonio; Lorenzo, Javier; Villarino, Ramon; Girbau, David;
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: Girbau Sala, David / Lázaro Guillén, Antonio Ramon / Villarino Villarino, Ramón Maria
    Paraules clau: Transponder Rfld Rfid Frequency selective surface (fss) Fmcw radar
    Resum: This paper describes an actively-controlled frequency selective surface (FSS) to implement a backscatter transponder. The FSS is composed by dipoles loaded with switching PIN diodes. The transponder exploits the change in the radar cross section (RCS) of the FSS with the bias of the diodes to modulate the backscattered response of the tag to the FMCW radar. The basic operation theory of the system is explained here. An experimental setup based on a commercial X-band FMCW radar working as a reader is proposed to measure the transponders. The transponder response can be distinguished from the interference of non-modulated clutter, modulating the transponder's RCS. Some FSS with different number of dipoles are studied, as a proof of concept. Experimental results at several distances are provided.
    Àrees temàtiques: Engineering, electrical & electronic Engenharias iv Electrical and electronic engineering
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: antonioramon.lazaro@urv.cat david.girbau@urv.cat ramon.villarino@urv.cat
    Identificador de l'autor: 0000-0003-3160-5777 0000-0001-7995-5536 0000-0001-9692-8943
    Data d'alta del registre: 2024-10-26
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Radioengineering. 23 (2): 632-641
    Referència de l'ítem segons les normes APA: Lazaro, Antonio; Lorenzo, Javier; Villarino, Ramon; Girbau, David; (2014). Backscatter Transponder Based on Frequency Selective Surface for FMCW Radar Applications. Brno: Brno University of Technology
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2014
    Tipus de publicació: Proceedings Paper

  • Paraules clau:

    Electrical and Electronic Engineering,Engineering, Electrical & Electronic
    Transponder
    Rfld
    Rfid
    Frequency selective surface (fss)
    Fmcw radar
    Engineering, electrical & electronic
    Engenharias iv
    Electrical and electronic engineering

  • Documents:

    DocumentPrincipal

  • Cerca a google

    Search to google scholar