Articles producció científica> Enginyeria Mecànica

Feasibility limits and performance of an absorption cooling machine using light alkane mixtures

  • Dades identificatives

    Identificador: imarina:5128444
    Autors:
    Dardour HMazouz SReneaume JMCezac PBourouis MBellagi A
    Resum:
    The performance of a heat-driven vapor absorption chiller with various alkane mixtures as working pairs was studied. A Thermodynamic analysis showed that under specified operating conditions and with a generator temperature below 130 °C, temperature achievable with a simple flat plate collector when solar energy is expected as the driving heat source, the application of some of the proposed alkane mixtures is not feasible. Simulations using ASPEN Plus flow sheeting program are then done with the selected working pairs. All simulations were done specifying the Peng-Robinson equation of state as the property method. A parametric study was carried out allowing the investigation of the generator temperature effect on the system performance and the comparison between performances released with each working pair. Results revealed that a water-cooled absorption machine using the C3H8/n-C9H20 pair as working fluid releases the best performances from a heat driving temperature level of about 100 °C.
  • Altres:

    Autor segons l'article: Dardour H; Mazouz S; Reneaume JM; Cezac P; Bourouis M; Bellagi A
    Departament: Enginyeria Mecànica
    Autor/s de la URV: Bourouis Chebata, Mahmoud
    Paraules clau: Oldham Cop Cooling Chiller Alkane Absorption
    Resum: The performance of a heat-driven vapor absorption chiller with various alkane mixtures as working pairs was studied. A Thermodynamic analysis showed that under specified operating conditions and with a generator temperature below 130 °C, temperature achievable with a simple flat plate collector when solar energy is expected as the driving heat source, the application of some of the proposed alkane mixtures is not feasible. Simulations using ASPEN Plus flow sheeting program are then done with the selected working pairs. All simulations were done specifying the Peng-Robinson equation of state as the property method. A parametric study was carried out allowing the investigation of the generator temperature effect on the system performance and the comparison between performances released with each working pair. Results revealed that a water-cooled absorption machine using the C3H8/n-C9H20 pair as working fluid releases the best performances from a heat driving temperature level of about 100 °C.
    Àrees temàtiques: Thermodynamics Química Medicina iii Mechanics Mechanical engineering Materiais Matemática / probabilidade e estatística Interdisciplinar Industrial and manufacturing engineering Fluid flow and transfer processes Engineering, mechanical Engenharias iv Engenharias iii Engenharias ii Engenharias i Energy engineering and power technology Energy & fuels Ciências biológicas ii Ciências ambientais Ciências agrárias i Ciência de alimentos Ciência da computação Biodiversidade Astronomia / física
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: mahmoud.bourouis@urv.cat
    Identificador de l'autor: 0000-0003-2476-5967
    Data d'alta del registre: 2024-09-07
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    Enllaç font original: https://www.sciencedirect.com/science/article/abs/pii/S1359431114011661
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Applied Thermal Engineering. 78 24-29
    Referència de l'ítem segons les normes APA: Dardour H; Mazouz S; Reneaume JM; Cezac P; Bourouis M; Bellagi A (2015). Feasibility limits and performance of an absorption cooling machine using light alkane mixtures. Applied Thermal Engineering, 78(), 24-29. DOI: 10.1016/j.applthermaleng.2014.12.037
    DOI de l'article: 10.1016/j.applthermaleng.2014.12.037
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2015
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Energy & Fuels,Energy Engineering and Power Technology,Engineering, Mechanical,Fluid Flow and Transfer Processes,Industrial and Manufacturing Engineering,Mechanical Engineering,Mechanics,Thermodynamics
    Oldham
    Cop
    Cooling
    Chiller
    Alkane
    Absorption
    Thermodynamics
    Química
    Medicina iii
    Mechanics
    Mechanical engineering
    Materiais
    Matemática / probabilidade e estatística
    Interdisciplinar
    Industrial and manufacturing engineering
    Fluid flow and transfer processes
    Engineering, mechanical
    Engenharias iv
    Engenharias iii
    Engenharias ii
    Engenharias i
    Energy engineering and power technology
    Energy & fuels
    Ciências biológicas ii
    Ciências ambientais
    Ciências agrárias i
    Ciência de alimentos
    Ciência da computação
    Biodiversidade
    Astronomia / física
  • Documents:

  • Cerca a google

    Search to google scholar