Articles producció científica> Ciències Mèdiques Bàsiques

SimDoseCT: Dose reporting software based on Monte Carlo simulation for a 320 detector-row cone-beam CT scanner and ICRP computational adult phantoms

  • Dades identificatives

    Identificador: imarina:5131746
    Autors:
    Cros, MariaJoemai, Raoul M SJoemai, Raoul M SGeleijns, JacobMolina, DiegoSalvado, Marcal
    Resum:
    This study aims to develop and test software for assessing and reporting doses for standard patients undergoing computed tomography (CT) examinations in a 320 detector-row cone-beam scanner. The software, called SimDoseCT, is based on the Monte Carlo (MC) simulation code, which was developed to calculate organ doses and effective doses in ICRP anthropomorphic adult reference computational phantoms for acquisitions with the Aquilion ONE CT scanner (Toshiba). MC simulation was validated by comparing CTDI measurements within standard CT dose phantoms with results from simulation under the same conditions. SimDoseCT consists of a graphical user interface connected to a MySQL database, which contains the look-up-tables that were generated with MC simulations for volumetric acquisitions at different scan positions along the phantom using any tube voltage, bow tie filter, focal spot and nine different beam widths. Two different methods were developed to estimate organ doses and effective doses from acquisitions using other available beam widths in the scanner. A correction factor was used to estimate doses in helical acquisitions. Hence, the user can select any available protocol in the Aquilion ONE scanner for a standard adult male or female and obtain the dose results through the software interface. Agreement within 9% between CTDI measurements and simulations allowed the validation of the MC program. Additionally, the algorithm for dose reporting in SimDoseCT was validated by comparing dose results from this tool with those obtained from MC simulations for three volumetric acquisitions (head, thorax and abdomen). The comparison was repeated using eight different collimations and also for another collimation in a helical abdomen examination. The results showed differences of
  • Altres:

    Autor segons l'article: Cros, Maria; Joemai, Raoul M S; Joemai, Raoul M S; Geleijns, Jacob; Molina, Diego; Salvado, Marcal
    Departament: Ciències Mèdiques Bàsiques
    Autor/s de la URV: Salvadó Artells, Marçal
    Paraules clau: Tomography, x-ray computed Tomography scanners, x-ray computed Software Radiation dosage Phantoms, imaging Monte carlo simulation Monte carlo method Male Icrp computational adult phantoms Humans Female Dose reporting software Databases, factual Ct dosimetry Cone-beam computed tomography Adult 320 detector-row cone-beam scanner
    Resum: This study aims to develop and test software for assessing and reporting doses for standard patients undergoing computed tomography (CT) examinations in a 320 detector-row cone-beam scanner. The software, called SimDoseCT, is based on the Monte Carlo (MC) simulation code, which was developed to calculate organ doses and effective doses in ICRP anthropomorphic adult reference computational phantoms for acquisitions with the Aquilion ONE CT scanner (Toshiba). MC simulation was validated by comparing CTDI measurements within standard CT dose phantoms with results from simulation under the same conditions. SimDoseCT consists of a graphical user interface connected to a MySQL database, which contains the look-up-tables that were generated with MC simulations for volumetric acquisitions at different scan positions along the phantom using any tube voltage, bow tie filter, focal spot and nine different beam widths. Two different methods were developed to estimate organ doses and effective doses from acquisitions using other available beam widths in the scanner. A correction factor was used to estimate doses in helical acquisitions. Hence, the user can select any available protocol in the Aquilion ONE scanner for a standard adult male or female and obtain the dose results through the software interface. Agreement within 9% between CTDI measurements and simulations allowed the validation of the MC program. Additionally, the algorithm for dose reporting in SimDoseCT was validated by comparing dose results from this tool with those obtained from MC simulations for three volumetric acquisitions (head, thorax and abdomen). The comparison was repeated using eight different collimations and also for another collimation in a helical abdomen examination. The results showed differences of 0.1 mSv or less for absolute dose in most organs and also in the effective dose calculation. The software provides a suitable tool for dose assessment in standard adult patients undergoing CT examinations in a 320 detector-row cone-beam scanner.
    Àrees temàtiques: Saúde coletiva Radiology, nuclear medicine and imaging Radiology, nuclear medicine & medical imaging Radiological and ultrasound technology Psicología Odontología Medicina ii Medicina i Matemática / probabilidade e estatística Interdisciplinar General medicine Engineering, biomedical Engenharias iv Engenharias iii Engenharias ii Ciências biológicas ii Ciências biológicas i Ciência da computação Astronomia / física
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 00319155
    Adreça de correu electrònic de l'autor: m.salvado@urv.cat
    Identificador de l'autor: 0000-0002-9399-6649
    Data d'alta del registre: 2024-09-28
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    Enllaç font original: http://iopscience.iop.org/article/10.1088/1361-6560/aa77ea/meta
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Physics In Medicine And Biology. 62 (15): 6304-6321
    Referència de l'ítem segons les normes APA: Cros, Maria; Joemai, Raoul M S; Joemai, Raoul M S; Geleijns, Jacob; Molina, Diego; Salvado, Marcal (2017). SimDoseCT: Dose reporting software based on Monte Carlo simulation for a 320 detector-row cone-beam CT scanner and ICRP computational adult phantoms. Physics In Medicine And Biology, 62(15), 6304-6321. DOI: 10.1088/1361-6560/aa77ea
    DOI de l'article: 10.1088/1361-6560/aa77ea
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2017
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Engineering, Biomedical,Radiological and Ultrasound Technology,Radiology, Nuclear Medicine & Medical Imaging,Radiology, Nuclear Medicine and Imaging
    Tomography, x-ray computed
    Tomography scanners, x-ray computed
    Software
    Radiation dosage
    Phantoms, imaging
    Monte carlo simulation
    Monte carlo method
    Male
    Icrp computational adult phantoms
    Humans
    Female
    Dose reporting software
    Databases, factual
    Ct dosimetry
    Cone-beam computed tomography
    Adult
    320 detector-row cone-beam scanner
    Saúde coletiva
    Radiology, nuclear medicine and imaging
    Radiology, nuclear medicine & medical imaging
    Radiological and ultrasound technology
    Psicología
    Odontología
    Medicina ii
    Medicina i
    Matemática / probabilidade e estatística
    Interdisciplinar
    General medicine
    Engineering, biomedical
    Engenharias iv
    Engenharias iii
    Engenharias ii
    Ciências biológicas ii
    Ciências biológicas i
    Ciência da computação
    Astronomia / física
  • Documents:

  • Cerca a google

    Search to google scholar