Autor segons l'article: Isarn I, Ramis X, Ferrando F, Serra A
Departament: Química Analítica i Química Orgànica Enginyeria Mecànica
e-ISSN: 2073-4360
Autor/s de la URV: Ferrando Piera, Francesc / Serra Albet, Maria Angels
Paraules clau: Thiol-epoxy Thermal conductivity Epoxy resin Cycloaliphatic epoxy resin Composites Boron nitride thermal conductivity cycloaliphatic epoxy resin composites boron nitride
Resum: In this work, the effect of the addition of boron nitride (BN) fillers in a thiol-cycloaliphatic epoxy formulation has been investigated. Calorimetric studies put into evidence that the kinetics of the curing has been scarcely affected and that the addition of particles does not affect the final structure of the network. Rheologic studies have shown the increase in the viscoelastic properties on adding the filler and allow the percolation threshold to be calculated, which was found to be 35.5%. The use of BN agglomerates of bigger size increases notably the viscosity of the formulation. Glass transition temperatures are not affected by the filler added, but Young's modulus and hardness have been notably enhanced. Thermal conductivity of the composites prepared shows a linear increase with the proportion of BN particle sheets added, reaching a maximum of 0.97 W/K·m. The addition of 80 μm agglomerates, allowed to increase this value until 1.75 W/K·m. View Full-Text Keywords: cycloaliphatic epoxy resin; composites; thermal conductivity; boron nitride; thiol-epoxy
Àrees temàtiques: Polymers and plastics Polymer science Odontología General chemistry Farmacia Engenharias ii Ciências biológicas ii Chemistry (miscellaneous) Chemistry (all) Biotecnología Astronomia / física
Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
ISSN: 20734360
Adreça de correu electrònic de l'autor: angels.serra@urv.cat f.ferrando@urv.cat
Identificador de l'autor: 0000-0003-1387-0358 0000-0003-4450-2734
Data d'alta del registre: 2024-09-07
Volum de revista: 10
Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
Enllaç font original: https://www.mdpi.com/2073-4360/10/3/277
URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
Referència a l'article segons font original: Polymers. 10 (3):
Referència de l'ítem segons les normes APA: Isarn I, Ramis X, Ferrando F, Serra A (2018). Thermoconductive Thermosetting Composites Based on Boron Nitride Fillers and Thiol-Epoxy Matrices. Polymers, 10(3), -. DOI: 10.3390/polym10030277
DOI de l'article: 10.3390/polym10030277
Entitat: Universitat Rovira i Virgili
Any de publicació de la revista: 2018
Tipus de publicació: Journal Publications