Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Robust feedback linearization control of a boost converter feeding a grid-tied inverter for PV applications

  • Dades identificatives

    Identificador: imarina:5611019
    Autors:
    Errouissi, RachidAl-Durra, AhmedMuyeen, S MEl Aroudi, Abdelali
    Resum:
    © 2018 Institution of Engineering and Technology. All rights reserved. In this paper, the feedback-linearization (FBL) technique is employed to design a dc-dc boost voltage regulator feeding a grid-tied inverter for photovoltaic (PV) systems. The key feature of the proposed approach is that only a voltage control loop is used to generate the driving signal for the converter and no current control loop is required. Thereby, unlike the cascaded structure, the bandwidth of the voltage control loop can be specified only by the switching frequency as there is no need for an intermediate inner-loop. The major concern of this control scheme is its limited ability to eliminate completely the steady-state error under model uncertainty and unknown disturbance such as the PV current, which is considered as an unmatched disturbance. For this purpose, the unknown perturbation is estimated by a disturbance observer (DO) and compensated in the control law to drive the steady-state error to zero. With a fast disturbance estimation, the composite controller is able to retain the nominal transient performance specified with the feedback linearization. The effectiveness of the proposed approach was verified by both simulation and experimental results, and a remarkable agreement was obtained while exhibiting excellent performances.
  • Altres:

    Autor segons l'article: Errouissi, Rachid; Al-Durra, Ahmed; Muyeen, S M; El Aroudi, Abdelali
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: El Aroudi Chaoui, Abdelali
    Resum: © 2018 Institution of Engineering and Technology. All rights reserved. In this paper, the feedback-linearization (FBL) technique is employed to design a dc-dc boost voltage regulator feeding a grid-tied inverter for photovoltaic (PV) systems. The key feature of the proposed approach is that only a voltage control loop is used to generate the driving signal for the converter and no current control loop is required. Thereby, unlike the cascaded structure, the bandwidth of the voltage control loop can be specified only by the switching frequency as there is no need for an intermediate inner-loop. The major concern of this control scheme is its limited ability to eliminate completely the steady-state error under model uncertainty and unknown disturbance such as the PV current, which is considered as an unmatched disturbance. For this purpose, the unknown perturbation is estimated by a disturbance observer (DO) and compensated in the control law to drive the steady-state error to zero. With a fast disturbance estimation, the composite controller is able to retain the nominal transient performance specified with the feedback linearization. The effectiveness of the proposed approach was verified by both simulation and experimental results, and a remarkable agreement was obtained while exhibiting excellent performances.
    Àrees temàtiques: Engineering, electrical & electronic Engenharias iv Engenharias iii Electrical and electronic engineering
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: abdelali.elaroudi@urv.cat
    Identificador de l'autor: 0000-0001-9103-7762
    Data d'alta del registre: 2024-10-12
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Enllaç font original: https://ietresearch.onlinelibrary.wiley.com/doi/10.1049/iet-pel.2017.0084
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Iet Power Electronics. 11 (3): 1-19
    Referència de l'ítem segons les normes APA: Errouissi, Rachid; Al-Durra, Ahmed; Muyeen, S M; El Aroudi, Abdelali (2018). Robust feedback linearization control of a boost converter feeding a grid-tied inverter for PV applications. Iet Power Electronics, 11(3), 1-19. DOI: 10.1049/iet-pel.2017.0084
    DOI de l'article: 10.1049/iet-pel.2017.0084
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2018
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Electrical and Electronic Engineering,Engineering, Electrical & Electronic
    Engineering, electrical & electronic
    Engenharias iv
    Engenharias iii
    Electrical and electronic engineering
  • Documents:

  • Cerca a google

    Search to google scholar