Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Classification of Three-phase grid-tied microinverters in photovoltaic applications

  • Dades identificatives

    Identificador: imarina:6466225
    Autors:
    Shawky, AhmedAhmed, MahrousOrabi, MohamedEl Aroudi, Abdelali
    Resum:
    © 2020 by the authors. Microinverters are an essential part of the photovoltaic (PV) industry with significant exponential prevalence in new PV module architectures. However, electrolyte capacitors used to decouple double line frequency make the single-phase microinverters topologies the slightest unit in this promising industry. Three-phase microinverter topologies are the new trend in this industry because they do not have double-line frequency problems and they do not need the use of electrolyte capacitors. Moreover, these topologies can provide additional features such as four-wire operation. This paper presents a detailed discussion of the strong points of three-phase microinverters compared to single-phase counterparts. The developed topologies of three-phase microinverters are presented and evaluated based on a new classification based on the simplest topologies among dozens of existing inverters. Moreover, the paper considers the required standardized features of PV, grid, and the microinverter topology. These features have been classified as mandatory and essential. Examples of the considered features for classifications are Distributed Maximum Power Point Tracking (DMPPT), voltage boosting gain, and four-wire operation. The developed classification is used to identify the merits and demerits of the classified inverter topologies. Finally, a recommendation is given based on the classified features, chosen inverter topologies, and associated features.
  • Altres:

    Autor segons l'article: Shawky, Ahmed; Ahmed, Mahrous; Orabi, Mohamed; El Aroudi, Abdelali
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: El Aroudi Chaoui, Abdelali
    Paraules clau: Topologies Three-phase System Solar energy Power point tracking Photovoltaic Partial shading conditions Optimization Modulation Microinverter Inverters Inverter Grid-connected Distributed generation Converter Ac-module
    Resum: © 2020 by the authors. Microinverters are an essential part of the photovoltaic (PV) industry with significant exponential prevalence in new PV module architectures. However, electrolyte capacitors used to decouple double line frequency make the single-phase microinverters topologies the slightest unit in this promising industry. Three-phase microinverter topologies are the new trend in this industry because they do not have double-line frequency problems and they do not need the use of electrolyte capacitors. Moreover, these topologies can provide additional features such as four-wire operation. This paper presents a detailed discussion of the strong points of three-phase microinverters compared to single-phase counterparts. The developed topologies of three-phase microinverters are presented and evaluated based on a new classification based on the simplest topologies among dozens of existing inverters. Moreover, the paper considers the required standardized features of PV, grid, and the microinverter topology. These features have been classified as mandatory and essential. Examples of the considered features for classifications are Distributed Maximum Power Point Tracking (DMPPT), voltage boosting gain, and four-wire operation. The developed classification is used to identify the merits and demerits of the classified inverter topologies. Finally, a recommendation is given based on the classified features, chosen inverter topologies, and associated features.
    Àrees temàtiques: Zootecnia / recursos pesqueiros Renewable energy, sustainability and the environment Renewable energy, sustainability and the environm Interdisciplinar General computer science Fuel technology Engineering (miscellaneous) Engenharias iv Engenharias iii Engenharias ii Energy engineering and power technology Energy (miscellaneous) Energy & fuels Electrical and electronic engineering Economia Control and optimization Ciências ambientais Ciências agrárias i Ciência da computação Building and construction Biotecnología Biodiversidade Astronomia / física
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 1996-1073
    Adreça de correu electrònic de l'autor: abdelali.elaroudi@urv.cat
    Identificador de l'autor: 0000-0001-9103-7762
    Data d'alta del registre: 2024-10-12
    Volum de revista: 13
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Enllaç font original: https://www.mdpi.com/1996-1073/13/11/2929
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Energies. 13 (11): 2929-
    Referència de l'ítem segons les normes APA: Shawky, Ahmed; Ahmed, Mahrous; Orabi, Mohamed; El Aroudi, Abdelali (2020). Classification of Three-phase grid-tied microinverters in photovoltaic applications. Energies, 13(11), 2929-. DOI: 10.3390/en13112929
    DOI de l'article: 10.3390/en13112929
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2020
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Control and Optimization,Electrical and Electronic Engineering,Energy & Fuels,Energy (Miscellaneous),Energy Engineering and Power Technology,Engineering (Miscellaneous),Fuel Technology,Renewable Energy, Sustainability and the Environm,Renewable Energy, Sustainability and the Environment
    Topologies
    Three-phase
    System
    Solar energy
    Power point tracking
    Photovoltaic
    Partial shading conditions
    Optimization
    Modulation
    Microinverter
    Inverters
    Inverter
    Grid-connected
    Distributed generation
    Converter
    Ac-module
    Zootecnia / recursos pesqueiros
    Renewable energy, sustainability and the environment
    Renewable energy, sustainability and the environm
    Interdisciplinar
    General computer science
    Fuel technology
    Engineering (miscellaneous)
    Engenharias iv
    Engenharias iii
    Engenharias ii
    Energy engineering and power technology
    Energy (miscellaneous)
    Energy & fuels
    Electrical and electronic engineering
    Economia
    Control and optimization
    Ciências ambientais
    Ciências agrárias i
    Ciência da computação
    Building and construction
    Biotecnología
    Biodiversidade
    Astronomia / física
  • Documents:

  • Cerca a google

    Search to google scholar