Autor segons l'article: Marin-Genesca, Marc; Garcia-Amoros, Jordi; Mujal-Rosas, Ramon; Massagues Vidal, Lluis; Bordes Arroyo, Jordi; Colom Fajula, Xavier
Departament: Enginyeria Mecànica
Autor/s de la URV: García Amorós, Jordi / Marín Genescà, Marc / Massagués Vidal, Lluís
Paraules clau: Tire recycling Rubber waste Polymer composites Mechanical properties Insulators Gtr recycling Electrical properties
Resum: © 2020 by the authors. Licensee MDPI, Basel, Switzerland. In the present research, we investigated the conceivable outcomes of using ground tire rubber (GTR) particle polymeric blends. Special methods of restoring tires that are no longer in use include GTR retreading, GTR blending destined for recycling to attain raw substances utilized in other industrial application production processes, and the valorization of GTR for power/energy generation. The recycling of end-of-life tires enables the recovery of rubber, steel, and fibers, all of which are valid on the market as raw materials to be used for other processes. There are methods to recycle GTRs in a clean and environmentally friendly way. In the present research, several industrial applications of GTR polymer blends were developed and compared with standard values from the Spanish Association for Standardization (UNE) and the International Electrotechnical Commission (IEC). In order to analyze the viability in many of the industrial applications selected, certain compounds obtained from the GTR polymer blends were analyzed regarding their use in nine low requirement insulator applications. The research and analysis developed in this manuscript used standard values from the UNE and IEC, and these standard values were compared with the test values. The obtained results were used to provide an application list that could be helpful for industrial applications. In this research, the pre-owned polymers were as follows: polypropylene (PP), high-density polyethylene (HDPE), polystyrene (PS), acrylonitrile butadiene-styrene (ABS), ethylene vinyl acetate (EVA), polyvinyl chloride (PVC), and polyamide (PA). The filler used was GTR with particle sizes lower than 200 microns. The amounts of GTR particles in the compound materials were 0% (raw polymer), 5%, 10%, 20%, 40%, 50%, and 70% (the latter being found in polymeric blends). We discovered six plausible modern applications of GTR polymer blends as indicated by the UNE and IEC standards.
Àrees temàtiques: Waste management and disposal Materials science (miscellaneous) Materials science (all) Management, monitoring, policy and law Green & sustainable science & technology General materials science
Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
ISSN: 23134321
Adreça de correu electrònic de l'autor: marc.marin@urv.cat jordi.garcia-amoros@urv.cat lluis.massagues@urv.cat
Identificador de l'autor: 0000-0002-7204-4526 0000-0002-6548-5059 0000-0002-4197-5600
Data d'alta del registre: 2024-10-19
Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
Enllaç font original: https://www.mdpi.com/2313-4321/5/3/16
URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
Referència a l'article segons font original: Recycling. 5 (3): 1-14
Referència de l'ítem segons les normes APA: Marin-Genesca, Marc; Garcia-Amoros, Jordi; Mujal-Rosas, Ramon; Massagues Vidal, Lluis; Bordes Arroyo, Jordi; Colom Fajula, Xavier (2020). Ground tire rubber recycling in applications as insulators in polymeric compounds, according to spanish une standards. Recycling, 5(3), 1-14. DOI: 10.3390/recycling5030016
DOI de l'article: 10.3390/recycling5030016
Entitat: Universitat Rovira i Virgili
Any de publicació de la revista: 2020
Tipus de publicació: Journal Publications