Autor segons l'article: Liashenko I; Ramon A; Cabot A; Rosell-Llompart J
Departament: Enginyeria Química
Autor/s de la URV: Rosell Llompart, Joan
Paraules clau: Near-field electrospinning Nanofiber Jet speed Electrohydrodynamic jet Additive manufacturing near-field electrospinning nanofiber jet speed electrohydrodynamic jet
Resum: Additive manufacturing by near-field electrospinning is based on the continuous deposition of a nanofiber on a substrate. Owing to the small fiber size and the high jet speeds that can be achieved, this method potentially combines submicrometer resolution with high printing speed. Printing with high fidelity depends critically on controlling the jet arrival speed, which must be matched to the printing speed. Unfortunately, current methods to determine the jet speed are cumbersome and cannot be performed in situ as they are based on laborious high-resolution imaging of individual nanofibers. Using inexpensive optical equipment, here we demonstrate a new way to determine the jet speed in situ during printing. Our strategy is based on electrostatic jet deflection, in which the speed is readily computed from the width of a printed object made from a periodically printed motif. Such width can be easily obtained inline by optical inspection, overcoming the need to resolve individual nanofibers. This information can be used to feedback control the printing process. The proposed approach will not only assist in studying the fundamental relation between the jet speed and other printing parameters, but also enable reproducible printing of fibers in a rapidly expanding area of applications.
Àrees temàtiques: Química Mechanics of materials Mechanical engineering Materials science, multidisciplinary Materials science (miscellaneous) Materials science (all) Materiais Matemática / probabilidade e estatística Interdisciplinar Geociências General materials science Engenharias iv Engenharias iii Engenharias ii Engenharias i Ciências agrárias i Ciência de alimentos Ciência da computação Astronomia / física Arquitetura e urbanismo
Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
Adreça de correu electrònic de l'autor: joan.rosell@urv.cat
Identificador de l'autor: 0000-0002-5288-9150
Data d'alta del registre: 2024-07-27
Volum de revista: 206
Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
Enllaç font original: https://www.sciencedirect.com/science/article/pii/S0264127521003440?via%3Dihub
URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
Referència a l'article segons font original: Materials & Design. 206
Referència de l'ítem segons les normes APA: Liashenko I; Ramon A; Cabot A; Rosell-Llompart J (2021). Ultrafast electrohydrodynamic 3D printing with in situ jet speed monitoring. Materials & Design, 206(), -. DOI: 10.1016/j.matdes.2021.109791
DOI de l'article: 10.1016/j.matdes.2021.109791
Entitat: Universitat Rovira i Virgili
Any de publicació de la revista: 2021
Tipus de publicació: Journal Publications