Articles producció científica> Enginyeria Mecànica

Numerical prediction of flow patterns in bubble pumps

  • Dades identificatives

    Identificador: imarina:9285064
    Autors:
    Benhmidene AChaouachi BBourouis MGabsi S
    Resum:
    In the present study, the ammonia-water mixing flow in a bubble pump is numerically simulated. The flow patterns of a two-phase flow in a bubble pump were studied under different conditions of heat flux and tube diameter. A one-dimensional two-fluid model was developed under constant heat flux. This model was used to predict the variations in void fraction and liquid and vapor velocities throughout the tube. Then, the void fraction profile and the curve of liquid velocity versus vapor velocity were used to predict the flow patterns along the tube length. It was found that at heat fluxes below 15 kW m -2, bubbly, slug, and churn flows are the dominating regimes, and the length of these flow regimes depends on the tube diameter. For heat fluxes higher than 15 kW m-2, the bubble pump operates under the churn and annular regimes, and the bubble pump performance is improved when the tube diameter increases. © 2011 American Society of Mechanical Engineers.
  • Altres:

    Autor segons l'article: Benhmidene A; Chaouachi B; Bourouis M; Gabsi S
    Departament: Enginyeria Mecànica
    Autor/s de la URV: Bourouis Chebata, Mahmoud
    Paraules clau: Void fraction profiles Void fraction Vertical 2-phase flow Vapors Vapor velocities Two phase flow Two fluid model Tubes (components) Tubes Tube length Tube diameters Transition Thermodynamic properties System Simulation Pumps Pump performance Numerical predictions Liquids Liquid velocities Heat flux Gas-liquid flow Forecasting Flow simulation Flow regimes Flow patterns Flow pattern Constant heat flux Churn flow Channels Bubble pump Binary-mixtures Ammonia water 2-fluid model
    Resum: In the present study, the ammonia-water mixing flow in a bubble pump is numerically simulated. The flow patterns of a two-phase flow in a bubble pump were studied under different conditions of heat flux and tube diameter. A one-dimensional two-fluid model was developed under constant heat flux. This model was used to predict the variations in void fraction and liquid and vapor velocities throughout the tube. Then, the void fraction profile and the curve of liquid velocity versus vapor velocity were used to predict the flow patterns along the tube length. It was found that at heat fluxes below 15 kW m -2, bubbly, slug, and churn flows are the dominating regimes, and the length of these flow regimes depends on the tube diameter. For heat fluxes higher than 15 kW m-2, the bubble pump operates under the churn and annular regimes, and the bubble pump performance is improved when the tube diameter increases. © 2011 American Society of Mechanical Engineers.
    Àrees temàtiques: Mechanical engineering Engineering, mechanical Engenharias iii
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: mahmoud.bourouis@urv.cat
    Identificador de l'autor: 0000-0003-2476-5967
    Data d'alta del registre: 2023-02-19
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    Enllaç font original: https://asmedigitalcollection.asme.org/fluidsengineering/article-abstract/133/3/031302/412211/Numerical-Prediction-of-Flow-Patterns-in-Bubble?redirectedFrom=fulltext
    Referència a l'article segons font original: Journal Of Fluids Engineering-Transactions Of The Asme. 133 (3):
    Referència de l'ítem segons les normes APA: Benhmidene A; Chaouachi B; Bourouis M; Gabsi S (2011). Numerical prediction of flow patterns in bubble pumps. Journal Of Fluids Engineering-Transactions Of The Asme, 133(3), -. DOI: 10.1115/1.4003664
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    DOI de l'article: 10.1115/1.4003664
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2011
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Engineering, Mechanical,Mechanical Engineering
    Void fraction profiles
    Void fraction
    Vertical 2-phase flow
    Vapors
    Vapor velocities
    Two phase flow
    Two fluid model
    Tubes (components)
    Tubes
    Tube length
    Tube diameters
    Transition
    Thermodynamic properties
    System
    Simulation
    Pumps
    Pump performance
    Numerical predictions
    Liquids
    Liquid velocities
    Heat flux
    Gas-liquid flow
    Forecasting
    Flow simulation
    Flow regimes
    Flow patterns
    Flow pattern
    Constant heat flux
    Churn flow
    Channels
    Bubble pump
    Binary-mixtures
    Ammonia water
    2-fluid model
    Mechanical engineering
    Engineering, mechanical
    Engenharias iii
  • Documents:

  • Cerca a google

    Search to google scholar