Articles producció científica> Enginyeria Informàtica i Matemàtiques

A Low-Cost and Do-It-Yourself Device for Pumping Monitoring in Deep Aquifers

  • Dades identificatives

    Identificador: imarina:9287097
    Autors:
    Aliagas, CPérez-Foguet, AMeseguer, RMillán, PMolina, C
    Resum:
    Water crises due to climate change, high population growth and increasing demands from industry and agriculture claim for increasing efficiency and universalizing water resources management strategies and techniques. Water monitoring helps providing necessary evidences for making sound decisions about managing water resources both now and in the future. In this work, a low cost and "do it yourself" communication device is proposed to record water production and energy consumption of electric pumpings from deep boreholes/wells, and to predict the impact of the ongoing and previous pumpings in the evolution of the water level in the aquifer. The proposal incorporates an edge-computing approach for the simulation of the aquifer response in real-time. Computation of results of interest is performed at the sensor, minimizing communication requirements and ensuring almost immediate results. An approximated solution to physically based modeling of aquifer response is computed thanks to the a priori expression of the water level time evolution in a reduced basis. The accuracy is enough to detect deviations from expected behaviour. The energy consumption of the device is very much reduced with respect to that of a full modelling, which can be computed off-line for calibrating reduced model parameters and perform detailed analyses. The device is tested in a real scenario, in a mountain subbasin of the Ebro river in Spain, obtaining a good trade-off between performance, price, and energy consumption.
  • Altres:

    Autor segons l'article: Aliagas, C; Pérez-Foguet, A; Meseguer, R; Millán, P; Molina, C
    Departament: Enginyeria Informàtica i Matemàtiques
    Autor/s de la URV: Aliagas Castell, Carlos / Millán Marco, Pedro / Molina Clemente, Carlos María
    Paraules clau: Tests Storativity Simulation Raspberry pi Package Optimization Low-cost device Lora communication Iot applications Groundwater monitoring Ga Do-it-yourself device
    Resum: Water crises due to climate change, high population growth and increasing demands from industry and agriculture claim for increasing efficiency and universalizing water resources management strategies and techniques. Water monitoring helps providing necessary evidences for making sound decisions about managing water resources both now and in the future. In this work, a low cost and "do it yourself" communication device is proposed to record water production and energy consumption of electric pumpings from deep boreholes/wells, and to predict the impact of the ongoing and previous pumpings in the evolution of the water level in the aquifer. The proposal incorporates an edge-computing approach for the simulation of the aquifer response in real-time. Computation of results of interest is performed at the sensor, minimizing communication requirements and ensuring almost immediate results. An approximated solution to physically based modeling of aquifer response is computed thanks to the a priori expression of the water level time evolution in a reduced basis. The accuracy is enough to detect deviations from expected behaviour. The energy consumption of the device is very much reduced with respect to that of a full modelling, which can be computed off-line for calibrating reduced model parameters and perform detailed analyses. The device is tested in a real scenario, in a mountain subbasin of the Ebro river in Spain, obtaining a good trade-off between performance, price, and energy consumption.
    Àrees temàtiques: Signal processing Physics, applied Hardware and architecture Engineering, electrical & electronic Engenharias iv Electrical and electronic engineering Control and systems engineering Computer science, information systems Computer networks and communications
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: carlos.molina@urv.cat pere.millan@urv.cat carles.aliagas@urv.cat carles.aliagas@urv.cat
    Identificador de l'autor: 0000-0003-1955-0128 0000-0002-4132-7099
    Data d'alta del registre: 2024-09-07
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Electronics. 11 (22):
    Referència de l'ítem segons les normes APA: Aliagas, C; Pérez-Foguet, A; Meseguer, R; Millán, P; Molina, C (2022). A Low-Cost and Do-It-Yourself Device for Pumping Monitoring in Deep Aquifers. Electronics, 11(22), -. DOI: 10.3390/electronics11223788
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2022
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Computer Networks and Communications,Computer Science, Information Systems,Control and Systems Engineering,Electrical and Electronic Engineering,Engineering, Electrical & Electronic,Hardware and Architecture,Physics, Applied,Signal Processing
    Tests
    Storativity
    Simulation
    Raspberry pi
    Package
    Optimization
    Low-cost device
    Lora communication
    Iot applications
    Groundwater monitoring
    Ga
    Do-it-yourself device
    Signal processing
    Physics, applied
    Hardware and architecture
    Engineering, electrical & electronic
    Engenharias iv
    Electrical and electronic engineering
    Control and systems engineering
    Computer science, information systems
    Computer networks and communications
  • Documents:

  • Cerca a google

    Search to google scholar