Articles producció científica> Química Física i Inorgànica

Microchip laser operation of Tm,Ho:KLu(WO4)2 crystal

  • Datos identificativos

    Identificador: PC:1131
    Handle: http://hdl.handle.net/20.500.11797/PC1131
  • Autores:

    Loiko, P.
    Serres, J.M.
    Mateos, X.
    Yumashev, K.
    Kuleshov, N.
    Petrov, V.
    Griebner, U.
    Aguiló, M.
    Díaz, F.
  • Otros:

    Autor según el artículo: Loiko, P. Serres, J.M. Mateos, X. Yumashev, K. Kuleshov, N. Petrov, V. Griebner, U. Aguiló, M. Díaz, F.
    Departamento: Química Física i Inorgànica
    e-ISSN: 1094-4087
    Resumen: A microchip laser is realized on the basis of a monoclinic Tm,Ho-codoped KLu(WO4)2 crystal cut for light propagation along the Ng optical indicatrix axis. This crystal cut provides positive thermal lens with extremely weak astigmatism, S/M = 4%. High sensitivity factors, M = dD/dPabs, of 24.9 and 24.1 m-1/W for the mg- and pg- tangential planes are calculated with respect to the absorbed pump power. Such thermo-optic behavior is responsible for mode stabilization in the plano-plano microchip laser cavity, as well as the demonstrated perfect circular beam profile (M2 < 1.1). Maximum continuous-wave output power of 450 mW is obtained with a slope efficiency of 31%. A set of output couplers is employed to achieve lasing in the spectral range of 2060-2096 nm. The increase of output coupler transmission results in deterioration of the laser performance attributed to the increased up-conversion losses.
    Acceso a la licencia de uso: https://creativecommons.org/licenses/by/3.0/es/
    Página final: 27984
    Volumen de revista: 22
    Versión del articulo depositado: info:eu-repo/semantics/publishedVersion
    Enlace a la fuente original: http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-23-27976
    DOI del artículo: 10.1364/OE.22.027976
    Entidad: Universitat Rovira i Virgili.
    Año de publicación de la revista: 2014
    Página inicial: 27976