Articles producció científica> Enginyeria Mecànica

Absorption heat transformer- state-of-the-art of industrial applications

  • Datos identificativos

    Identificador: imarina:9187105
    Autores:
    Cudok, FalkGiannetti, NiccoloCiganda, Jose L. CorralesAoyama, JunBabu, P.Coronas, AlbertoFujii, TatsuoInoue, NaoyukiSaito, KiyoshiYamaguchi, SeiichiZiegler, Felix
    Resumen:
    The use of waste heat or low-exergy heat sources represents a strategic opportunity to reduce the environmental footprint and operation cost of industrial processes. The absorption heat transformer, also known as absorption heat pump type II, is a thermal machine which can boost the temperature of a heat flow by using a negligible amount of electrical power. However, owing to the lack of established technical knowledge and the absence of comprehensive recordings of successful heat transformer applications, the feasibility and reliability of absorption heat transformers have been questioned and the diffusion of this technology remained limited. Therefore, in this paper, all the industrial applications of the absorption heat transformer that are recorded in previous literature and yet unpublished reports are presented and discussed. In addition to literature research, intense knowledge exchange with three leading manufacturers of absorption heat transformers gave an accurate perspective on the technological level of commercial products and operative installations. It is shown that between 1981 and 2019, 48 absorption heat transformers have been installed in 42 plants with a total capacity of ?134 MW. Two main implementation periods, separated by 25 years of infrequent heat transformer installations, have been recognised. More than 74% of the installations were in Asia. Approximately 61% of the heat transformer installations were applied into the chemical industry. Therefore, through the analysis of the technical challenges and their solutions, along with related economical aspects of heat transformer installations, the effective state-of-the-art of this technology is presented and discussed.
  • Otros:

    Autor según el artículo: Cudok, Falk; Giannetti, Niccolo; Ciganda, Jose L. Corrales; Aoyama, Jun; Babu, P.; Coronas, Alberto; Fujii, Tatsuo; Inoue, Naoyuki; Saito, Kiyoshi; Yamaguchi, Seiichi; Ziegler, Felix;
    Departamento: Enginyeria Mecànica
    Autor/es de la URV: Coronas Salcedo, Alberto
    Palabras clave: Waste heat Technical challenges Strategic opportunity Literature researches Knowledge management Installation Industrial processs Industrial applications Heat recovery Heat pump systems Environmental footprints Commercial products Chemical industry Absorption heat transformer Absorption heat pumps Absorption heat pump type ii
    Resumen: The use of waste heat or low-exergy heat sources represents a strategic opportunity to reduce the environmental footprint and operation cost of industrial processes. The absorption heat transformer, also known as absorption heat pump type II, is a thermal machine which can boost the temperature of a heat flow by using a negligible amount of electrical power. However, owing to the lack of established technical knowledge and the absence of comprehensive recordings of successful heat transformer applications, the feasibility and reliability of absorption heat transformers have been questioned and the diffusion of this technology remained limited. Therefore, in this paper, all the industrial applications of the absorption heat transformer that are recorded in previous literature and yet unpublished reports are presented and discussed. In addition to literature research, intense knowledge exchange with three leading manufacturers of absorption heat transformers gave an accurate perspective on the technological level of commercial products and operative installations. It is shown that between 1981 and 2019, 48 absorption heat transformers have been installed in 42 plants with a total capacity of ?134 MW. Two main implementation periods, separated by 25 years of infrequent heat transformer installations, have been recognised. More than 74% of the installations were in Asia. Approximately 61% of the heat transformer installations were applied into the chemical industry. Therefore, through the analysis of the technical challenges and their solutions, along with related economical aspects of heat transformer installations, the effective state-of-the-art of this technology is presented and discussed.
    Áreas temáticas: Saúde coletiva Renewable energy, sustainability and the environment Química Materiais Interdisciplinar Green & sustainable science & technology Geociências Engenharias iv Engenharias iii Engenharias ii Engenharias i Energy & fuels Economia Ciências ambientais Ciências agrárias i Ciência de alimentos Biotecnología Biodiversidade Astronomia / física Arquitetura, urbanismo e design Administração pública e de empresas, ciências contábeis e turismo
    Acceso a la licencia de uso: https://creativecommons.org/licenses/by/3.0/es/
    Direcció de correo del autor: alberto.coronas@urv.cat
    Identificador del autor: 0000-0002-6109-3680
    Fecha de alta del registro: 2024-07-27
    Versión del articulo depositado: info:eu-repo/semantics/acceptedVersion
    Enlace a la fuente original: https://www.sciencedirect.com/science/article/abs/pii/S1364032121000526
    URL Documento de licencia: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referencia al articulo segun fuente origial: Renewable & Sustainable Energy Reviews. 141 (110757):
    Referencia de l'ítem segons les normes APA: Cudok, Falk; Giannetti, Niccolo; Ciganda, Jose L. Corrales; Aoyama, Jun; Babu, P.; Coronas, Alberto; Fujii, Tatsuo; Inoue, Naoyuki; Saito, Kiyoshi; Ya (2021). Absorption heat transformer- state-of-the-art of industrial applications. Renewable & Sustainable Energy Reviews, 141(110757), -. DOI: 10.1016/j.rser.2021.110757
    DOI del artículo: 10.1016/j.rser.2021.110757
    Entidad: Universitat Rovira i Virgili
    Año de publicación de la revista: 2021
    Tipo de publicación: Journal Publications
  • Palabras clave:

    Energy & Fuels,Green & Sustainable Science & Technology,Renewable Energy, Sustainability and the Environment
    Waste heat
    Technical challenges
    Strategic opportunity
    Literature researches
    Knowledge management
    Installation
    Industrial processs
    Industrial applications
    Heat recovery
    Heat pump systems
    Environmental footprints
    Commercial products
    Chemical industry
    Absorption heat transformer
    Absorption heat pumps
    Absorption heat pump type ii
    Saúde coletiva
    Renewable energy, sustainability and the environment
    Química
    Materiais
    Interdisciplinar
    Green & sustainable science & technology
    Geociências
    Engenharias iv
    Engenharias iii
    Engenharias ii
    Engenharias i
    Energy & fuels
    Economia
    Ciências ambientais
    Ciências agrárias i
    Ciência de alimentos
    Biotecnología
    Biodiversidade
    Astronomia / física
    Arquitetura, urbanismo e design
    Administração pública e de empresas, ciências contábeis e turismo
  • Documentos:

  • Cerca a google

    Search to google scholar