Articles producció científica> Enginyeria Química

Efficient extraction of lipids from primary sewage sludge using ionic liquids for biodiesel production

  • Dades identificatives

    Identificador: PC:1210
    Autors:
    Bengoa, C.Font, J.Fortuny, A.Stüber, F.Fabregat, A.Earle, M.J.Plechkova, N.V.Olkiewicz, M.
    Resum:
    DOI: 10.1016/j.seppur.2015.08.038
  • Altres:

    Autor segons l'article: Bengoa, C. Font, J. Fortuny, A. Stüber, F. Fabregat, A. Earle, M.J. Plechkova, N.V. Olkiewicz, M.
    Departament: Enginyeria Química
    Autor/s de la URV: OLKIEWICZ, MAGDALENA Plechkova, N.V. Earle, M.J. FABREGAT LLANGOSTERA, AZAEL STÜBER, FRANK ERICH FORTUNY SANROMÀ, AGUSTÍ FONT CAPAFONS, JOSÉ BENGOA, CHRISTOPHE JOSÉ
    Paraules clau: Cellulosic material ionic liquid Primary sludge Biodiesel Lipid extraction
    Resum: This study proposes a novel method to extract lipids from wet primary sludge for biodiesel production using ionic liquids. Tetrakis(hydroxymethyl)phosphonium chloride and widely used 1-butyl-3- methylimidazolium methyl sulfate were evaluated to extract lipids from raw and dried sludge (96% and 2%, wt. water content, respectively) and compared to the conventional Soxhlet method using organic solvents. Both these ionic liquids showed suitability for lipid extraction from raw sludge, giving even better results than expected from dried sludge. The [C4mim][MeSO4] ionic liquid reached 18.5% and 26.9% of lipids, 14.1% and 18.4% of biodiesel from dried and raw sludge, respectively. The [P(CH2OH)4]Cl ionic liquid gained 23.4% and 27.6% of lipids, 17.0% and 19.8% of biodiesel from dried and raw sludge respectively, reaching comparable results to the conventional Soxhlet method (27.2% of lipids, 19.4% of biodiesel). Therefore, the proposed ionic liquid process is efficient in lipid extraction directly from wet primary sludge, eliminating the expensive step of sludge drying and the use of volatile organic solvents. Under the optimised extraction conditions using [P(CH2OH)4]Cl ionic liquid and raw sludge (1:5 sludge (g/ TS):IL (cm3) ratio, 100 C and 3 h), the obtained yield of lipids and biodiesel amounted to 25.7% and 21.1%, respectively. Additionally, lipid extraction using [P(CH2OH)4]Cl ionic liquid also precipitates cellulosic material, which allows for direct and easy cellulose-based co-product recovery, giving high additional value to the process. Consequently, the economic and environmental aspects of biodiesel production from sewage sludge could be improved.
    Grup de recerca: Enginyeria de la Reacció Química i Intensificació de Processos
    Àrees temàtiques: Chemical engineering Ingeniería química Enginyeria química
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 1383-5866
    Identificador de l'autor: 0000-0001-9160-5010 0000-0002-4007-7905 0000-0002-2350-8654 0000-0001-9424-1400 0000-0002-5525-5401 n/a 0000-0003-2254-9603 0000-0002-9849-6715
    Data d'alta del registre: 2015-09-15
    Pàgina final: 125
    Volum de revista: 153
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    Enllaç font original: https://www.sciencedirect.com/science/article/pii/S1383586615301738?via%3Dihub
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    DOI de l'article: 10.1016/j.seppur.2015.08.038
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2015
    Pàgina inicial: 118
    Tipus de publicació: Article Artículo Article
  • Paraules clau:

    Fangs residuals
    Solucions iòniques
    Biodièsels
    Cellulosic material
    ionic liquid
    Primary sludge
    Biodiesel
    Lipid extraction
    Chemical engineering
    Ingeniería química
    Enginyeria química
    1383-5866
  • Documents:

  • Cerca a google

    Search to google scholar