Articles producció científica> Química Analítica i Química Orgànica

New epoxy thermosets derived from clove oil prepared by epoxy-amine curing

  • Dades identificatives

    Identificador: imarina:6122647
    Autors:
    Santiago, DavidGuzman, DailynRamis, XavierFerrando, FrancescSerra, Angels
    Resum:
    © 2019 by the authors. New thermosets from a triglycidyl eugenol derivative (3EPOEU) as a renewable epoxy monomer were obtained by an epoxy-amine curing process. A commercially-available Jeamine® and isophorone diamine, both obtained from renewable resources, were used as crosslinking agents, and the materials obtained were compared with those obtained from a standard diglycidylether of bisphenol A (DGEBA). The evolution of the curing process was studied by dierential scanning calorimetry and the materials obtained were characterized by means of calorimetry, thermogravimetry, thermodynamomechanical analysis, stress-strain tests and microindentation. 3EPOEU formulations were slightly less reactive, and the thermosets obtained showed higher Tgs than those prepared from DGEBA, since they had higher crosslinking density than formulations with DGEBA because of the more compact structure and higher functionality of the eugenol derivative. 3EPOEU thermosets showed good thermal stability and mechanical properties. The results obtained in this study allow us to conclude that the triglycidyl derivative of eugenol, 3EPOEU, is a safe and environmentally friendly alternative to DGEBA.
  • Altres:

    Autor segons l'article: Santiago, David; Guzman, Dailyn; Ramis, Xavier; Ferrando, Francesc; Serra, Angels
    Departament: Química Analítica i Química Orgànica
    Autor/s de la URV: Ferrando Piera, Francesc / Serra Albet, Maria Angels / Serra Masdeu, Anna Isabel Maria
    Paraules clau: Thermosets Renewable resources Eugenol renewable resources eugenol
    Resum: © 2019 by the authors. New thermosets from a triglycidyl eugenol derivative (3EPOEU) as a renewable epoxy monomer were obtained by an epoxy-amine curing process. A commercially-available Jeamine® and isophorone diamine, both obtained from renewable resources, were used as crosslinking agents, and the materials obtained were compared with those obtained from a standard diglycidylether of bisphenol A (DGEBA). The evolution of the curing process was studied by dierential scanning calorimetry and the materials obtained were characterized by means of calorimetry, thermogravimetry, thermodynamomechanical analysis, stress-strain tests and microindentation. 3EPOEU formulations were slightly less reactive, and the thermosets obtained showed higher Tgs than those prepared from DGEBA, since they had higher crosslinking density than formulations with DGEBA because of the more compact structure and higher functionality of the eugenol derivative. 3EPOEU thermosets showed good thermal stability and mechanical properties. The results obtained in this study allow us to conclude that the triglycidyl derivative of eugenol, 3EPOEU, is a safe and environmentally friendly alternative to DGEBA.
    Àrees temàtiques: Polymers and plastics Polymer science Odontología General chemistry Farmacia Engenharias ii Ciências biológicas ii Chemistry (miscellaneous) Chemistry (all) Biotecnología Astronomia / física
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 20734360
    Adreça de correu electrònic de l'autor: angels.serra@urv.cat annaisabel.serra@urv.cat f.ferrando@urv.cat
    Identificador de l'autor: 0000-0003-1387-0358 0000-0001-9353-7154 0000-0003-4450-2734
    Data d'alta del registre: 2024-11-02
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Enllaç font original: https://www.mdpi.com/2073-4360/12/1/44
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Polymers. 12 (1): 44-
    Referència de l'ítem segons les normes APA: Santiago, David; Guzman, Dailyn; Ramis, Xavier; Ferrando, Francesc; Serra, Angels (2020). New epoxy thermosets derived from clove oil prepared by epoxy-amine curing. Polymers, 12(1), 44-. DOI: 10.3390/polym12010044
    DOI de l'article: 10.3390/polym12010044
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2020
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Chemistry (Miscellaneous),Polymer Science,Polymers and Plastics
    Thermosets
    Renewable resources
    Eugenol
    renewable resources
    eugenol
    Polymers and plastics
    Polymer science
    Odontología
    General chemistry
    Farmacia
    Engenharias ii
    Ciências biológicas ii
    Chemistry (miscellaneous)
    Chemistry (all)
    Biotecnología
    Astronomia / física
  • Documents:

  • Cerca a google

    Search to google scholar