Articles producció científica> Enginyeria Mecànica

Approach for the analysis of TES technologies aiming towards a circular economy: Case study of building-like cubicles

  • Dades identificatives

    Identificador: imarina:6389757
    Autors:
    Boer DSegarra MFernández AVallès MMateu CCabeza L
    Resum:
    © 2020 Elsevier Ltd The objective of this study is to establish an initial framework to evaluate and improve the sustainability of technologies integrating thermal energy storage to come closer to a circular economy. This is applied to a case study for a building-like cubicle that includes different options of phase change materials. For the construction of a cubicle, materials can come from ores and virgin or recycled feedstock. In order to decrease the impact of materials and approach to a circular economy, the recycled content of materials at the start of life should be as high as possible. This recycled fraction in current supply depends on the available technologies for reintroducing the recycled materials in the production processes, together with virgin materials coming from primary sources. The results of the analysis show that the decrease of the environmental impact of recycling at the end of life is lower than 5%, while using recycled materials replacing virgin raw materials could reduce the overall impact by up to 30%. Most relevant materials are bricks, steel, and aluminum. Thus, reuse and recycling of materials and components must be integrated into the initial design in order to come closer to the concept of circular economy.
  • Altres:

    Autor segons l'article: Boer D; Segarra M; Fernández A; Vallès M; Mateu C; Cabeza L
    Departament: Enginyeria Mecànica
    Autor/s de la URV: Boer, Dieter-Thomas / Vallès Rasquera, Joan Manel
    Paraules clau: Thermal energy storage Recycling Recipe Life cycle assessment Circular economy
    Resum: © 2020 Elsevier Ltd The objective of this study is to establish an initial framework to evaluate and improve the sustainability of technologies integrating thermal energy storage to come closer to a circular economy. This is applied to a case study for a building-like cubicle that includes different options of phase change materials. For the construction of a cubicle, materials can come from ores and virgin or recycled feedstock. In order to decrease the impact of materials and approach to a circular economy, the recycled content of materials at the start of life should be as high as possible. This recycled fraction in current supply depends on the available technologies for reintroducing the recycled materials in the production processes, together with virgin materials coming from primary sources. The results of the analysis show that the decrease of the environmental impact of recycling at the end of life is lower than 5%, while using recycled materials replacing virgin raw materials could reduce the overall impact by up to 30%. Most relevant materials are bricks, steel, and aluminum. Thus, reuse and recycling of materials and components must be integrated into the initial design in order to come closer to the concept of circular economy.
    Àrees temàtiques: Renewable energy, sustainability and the environment Química Materiais Interdisciplinar Green & sustainable science & technology Geografía Geociências Farmacia Engenharias iv Engenharias iii Engenharias ii Engenharias i Energy & fuels Ciências biológicas iii Ciências biológicas ii Ciências biológicas i Ciências ambientais Ciências agrárias i Ciência de alimentos Ciência da computação Biotecnología Biodiversidade Astronomia / física Arquitetura, urbanismo e design Arquitetura e urbanismo Administração, ciências contábeis e turismo Administração pública e de empresas, ciências contábeis e turismo
    ISSN: 09601481
    Adreça de correu electrònic de l'autor: manel.valles@urv.cat dieter.boer@urv.cat
    Identificador de l'autor: 0000-0002-0748-1287 0000-0002-5532-6409
    Data d'alta del registre: 2024-06-22
    Versió de l'article dipositat: info:eu-repo/semantics/submittedVersion
    Enllaç font original: https://www.sciencedirect.com/science/article/abs/pii/S0960148119319755
    Referència a l'article segons font original: Renewable Energy. 150 589-597
    Referència de l'ítem segons les normes APA: Boer D; Segarra M; Fernández A; Vallès M; Mateu C; Cabeza L (2020). Approach for the analysis of TES technologies aiming towards a circular economy: Case study of building-like cubicles. Renewable Energy, 150(), 589-597. DOI: 10.1016/j.renene.2019.12.103
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    DOI de l'article: 10.1016/j.renene.2019.12.103
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2020
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Energy & Fuels,Green & Sustainable Science & Technology,Renewable Energy, Sustainability and the Environment
    Thermal energy storage
    Recycling
    Recipe
    Life cycle assessment
    Circular economy
    Renewable energy, sustainability and the environment
    Química
    Materiais
    Interdisciplinar
    Green & sustainable science & technology
    Geografía
    Geociências
    Farmacia
    Engenharias iv
    Engenharias iii
    Engenharias ii
    Engenharias i
    Energy & fuels
    Ciências biológicas iii
    Ciências biológicas ii
    Ciências biológicas i
    Ciências ambientais
    Ciências agrárias i
    Ciência de alimentos
    Ciência da computação
    Biotecnología
    Biodiversidade
    Astronomia / física
    Arquitetura, urbanismo e design
    Arquitetura e urbanismo
    Administração, ciências contábeis e turismo
    Administração pública e de empresas, ciências contábeis e turismo
  • Documents:

  • Cerca a google

    Search to google scholar