Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Coupled inductors design of the bidirectional non-inverting buck-boost converter for high-voltage applications

  • Dades identificatives

    Identificador: imarina:9048290
    Autors:
    Gonzalez-Castano, CatalinaRestrepo, CarlosGiral, RobertoGarcia-Amoros, JordiVidal-Idiarte, EnricCalvente, Javier
    Resum:
    This work analyses the effects on the efficiency of the winding-to-winding capacitance of the coupled-inductor of the bidirectional non-inverting buck-boost converter in high-voltage applications. This converter presents many advantages that make it suitable for low-voltage hard-switching photovoltaic and fuel cell hybrid systems. However, experimental results obtained using the previously reported procedure to implement the coupled inductors show low-efficiency in high-voltage applications. A different implementation procedure of the coupled inductors, with lower winding-to-winding capacitance, is proposed. High-efficiency experimental results from a 400 V 1.6 kW prototype have been achieved over a wide operating voltage range, thanks to the use of SiC devices and the modified coupled inductors, confirming in this way its good potential as a building block also in high-voltage wide-gain-range applications.
  • Altres:

    Autor segons l'article: Gonzalez-Castano, Catalina; Restrepo, Carlos; Giral, Roberto; Garcia-Amoros, Jordi; Vidal-Idiarte, Enric; Calvente, Javier
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: Calvente Calvo, Francisco Javier / García Amorós, Jordi / Giral Castillon, Roberto / Vidal Idiarte, Enric
    Paraules clau: Windings Winding-to-winding capacitance Wide operating voltage range Voltage 400 Sic Power inductors Power convertors Power 1 Modified coupled inductor design Low-voltage hard-switching photovoltaic systems High-voltage wide-gain-range applications High-voltage applications Fuel cell hybrid systems Dc-dc converter Capacitor Bidirectional noninverting buck-boost converter 6 kw 0 v
    Resum: This work analyses the effects on the efficiency of the winding-to-winding capacitance of the coupled-inductor of the bidirectional non-inverting buck-boost converter in high-voltage applications. This converter presents many advantages that make it suitable for low-voltage hard-switching photovoltaic and fuel cell hybrid systems. However, experimental results obtained using the previously reported procedure to implement the coupled inductors show low-efficiency in high-voltage applications. A different implementation procedure of the coupled inductors, with lower winding-to-winding capacitance, is proposed. High-efficiency experimental results from a 400 V 1.6 kW prototype have been achieved over a wide operating voltage range, thanks to the use of SiC devices and the modified coupled inductors, confirming in this way its good potential as a building block also in high-voltage wide-gain-range applications.
    Àrees temàtiques: Engineering, electrical & electronic Engenharias iv Engenharias iii Electrical and electronic engineering
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: roberto.giral@urv.cat javier.calvente@urv.cat jordi.garcia-amoros@urv.cat enric.vidal@urv.cat
    Identificador de l'autor: 0000-0001-6582-6741 0000-0001-8012-1889 0000-0002-6548-5059 0000-0002-6016-4096
    Data d'alta del registre: 2024-10-19
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Enllaç font original: https://ietresearch.onlinelibrary.wiley.com/doi/10.1049/iet-pel.2019.1479
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Iet Power Electronics. 13 (14): 3188-3198
    Referència de l'ítem segons les normes APA: Gonzalez-Castano, Catalina; Restrepo, Carlos; Giral, Roberto; Garcia-Amoros, Jordi; Vidal-Idiarte, Enric; Calvente, Javier (2020). Coupled inductors design of the bidirectional non-inverting buck-boost converter for high-voltage applications. Iet Power Electronics, 13(14), 3188-3198. DOI: 10.1049/iet-pel.2019.1479
    DOI de l'article: 10.1049/iet-pel.2019.1479
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2020
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Electrical and Electronic Engineering,Engineering, Electrical & Electronic
    Windings
    Winding-to-winding capacitance
    Wide operating voltage range
    Voltage 400
    Sic
    Power inductors
    Power convertors
    Power 1
    Modified coupled inductor design
    Low-voltage hard-switching photovoltaic systems
    High-voltage wide-gain-range applications
    High-voltage applications
    Fuel cell hybrid systems
    Dc-dc converter
    Capacitor
    Bidirectional noninverting buck-boost converter
    6 kw
    0 v
    Engineering, electrical & electronic
    Engenharias iv
    Engenharias iii
    Electrical and electronic engineering
  • Documents:

  • Cerca a google

    Search to google scholar