Autor segons l'article: Guerrero-Ruíz F; Yara-Varón E; Dolores González M; Torres M; Salagre P; Canela-Garayoa R; Cesteros Y
Departament: Química Física i Inorgànica
Autor/s de la URV: Cesteros Fernández, Yolanda / González Candela, Maria Dolores / Guerrero Ruiz, Federico / Salagre Carnero, María Pilar
Paraules clau: Sapo Microwaves Immobilised lipase Furfural Crude glycerol Catalytic acetalization Biofuel additives
Resum: High-pure crude glycerol, obtained from the transesterification of coconut oil with ethanol using lipase enzyme-type as biocatalyst, has been used for the acetalization of furfural with several SAPO 5 and SAPO 34 catalysts. SAPOs were prepared using microwaves and conventional heating for comparison, and were characterized by X-ray diffraction, nitrogen physisorption, elemental analysis, thermogravimetry of adsorbed cyclohexylamine and scanning electron microscopy techniques. The use of microwaves allowed us the incorporation of slightly higher amounts of silicon into the aluminophosphate structure, and the preparation of the materials in much shorter preparation times, with the subsequent energy saving. Additionally, the SAPOs prepared with microwaves showed lower crystallinity but higher surface area than those prepared by conventional heating. Comparable catalytic results were obtained when these catalysts were tested for the acetalization of furfural with commercial or with the crude glycerol obtained by biocatalytic transesterification of coconut oil, leading to very high selectivity values to the desired mixture dioxane + dioxolane (93–100 %), which can be used as biofuel additives, for conversion values between 60 and 73 %, as determined by gas chromatography. This confirmed the high purity of the glycerol obtained by the biocatalytical process, as previously observed by 1H NMR. SAPO 34 catalysts showed higher conversion than SAPO 5 catalysts due to their higher amount of more accessible Brønsted acid sites, related to their structure. Interestingly, catalysts prepared with microwaves resulted in slightly higher conversion values than those prepared by conventional heating. This can be explained by the incorporation of higher amounts of silicon in the framework, probably due to the higher homogeneity of the microwaves heating, which results in a higher amount of protons, as confirmed by TGA of adsorbed cyclohexylamine, responsible for the catalysis.
Àrees temàtiques: Saúde coletiva Química Organic chemistry Odontología Medicina i Materiais Matemática / probabilidade e estatística Interdisciplinar Geociências General chemical engineering Fuel technology Farmacia Ensino Engineering, chemical Engenharias iv Engenharias iii Engenharias ii Engenharias i Energy engineering and power technology Energy & fuels Ciências biológicas ii Ciências biológicas i Ciências ambientais Ciências agrárias i Ciência de alimentos Chemical engineering (miscellaneous) Chemical engineering (all) Biotecnología Biodiversidade Astronomia / física
Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
Adreça de correu electrònic de l'autor: federico.guerrero@estudiants.urv.cat federico.guerrero@estudiants.urv.cat yolanda.cesteros@urv.cat
Identificador de l'autor: 0000-0001-7163-4068 0000-0001-7163-4068 0000-0002-5439-9358
Data d'alta del registre: 2024-09-07
Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
Enllaç font original: https://www.sciencedirect.com/science/article/pii/S0016236122006652
URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
Referència a l'article segons font original: Fuel. 319 123803-
Referència de l'ítem segons les normes APA: Guerrero-Ruíz F; Yara-Varón E; Dolores González M; Torres M; Salagre P; Canela-Garayoa R; Cesteros Y (2022). Use of biobased crude glycerol, obtained biocatalytically, to obtain biofuel additives by catalytic acetalization of furfural using SAPO catalysts. Fuel, 319(), 123803-. DOI: 10.1016/j.fuel.2022.123803
DOI de l'article: 10.1016/j.fuel.2022.123803
Entitat: Universitat Rovira i Virgili
Any de publicació de la revista: 2022
Tipus de publicació: Journal Publications
Repositori URV