Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Signal Processing Techniques for Chipless UWB RFID Thermal Threshold Detector Detection

  • Dades identificatives

    Identificador: imarina:9282608
    Autors:
    Lazaro ARamos AGirbau DVillarino R
    Resum:
    This letter presents signal processing techniques to detect a passive thermal threshold detector based on a chipless time-domain ultrawideband (UWB) radio frequency identification (RFID) tag. The tag is composed by a UWB antenna connected to a transmission line, in turn loaded with a biomorphic thermal switch. The working principle consists of detecting the impedance change of the thermal switch. This change occurs when the temperature exceeds a threshold. A UWB radar is used as the reader. The difference between the actual time sample and a reference signal obtained from the averaging of previous samples is used to determine the switch transition and to mitigate the interferences derived from clutter reflections. A gain compensation function is applied to equalize the attenuation due to propagation loss. An improved method based on the continuous wavelet transform with Morlet wavelet is used to overcome detection problems associated to a low signal-to-noise ratio at the receiver. The average delay profile is used to detect the tag delay. Experimental measurements up to 5 m are obtained. © 2015 IEEE.
  • Altres:

    Autor segons l'article: Lazaro A; Ramos A; Girbau D; Villarino R
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: Girbau Sala, David / Lázaro Guillén, Antonio Ramon / Ramos Gadea, Ana Maria / Villarino Villarino, Ramón Maria
    Paraules clau: Wavelet transforms Ultrawideband (uwb) Ultra-wideband radio Ultra-wideband (uwb) Time domain analysis Threshold detectors Temperature sensors Temperature sensor Signal to noise ratio Signal receivers Signal processing technique Signal processing Signal detection Radio waves Radio frequency identification (rfid) Low signal-to-noise ratio Gain compensations Continuous wavelet transforms Continuous wavelet transform (cwt) Continuous wavelet transform Chipless
    Resum: This letter presents signal processing techniques to detect a passive thermal threshold detector based on a chipless time-domain ultrawideband (UWB) radio frequency identification (RFID) tag. The tag is composed by a UWB antenna connected to a transmission line, in turn loaded with a biomorphic thermal switch. The working principle consists of detecting the impedance change of the thermal switch. This change occurs when the temperature exceeds a threshold. A UWB radar is used as the reader. The difference between the actual time sample and a reference signal obtained from the averaging of previous samples is used to determine the switch transition and to mitigate the interferences derived from clutter reflections. A gain compensation function is applied to equalize the attenuation due to propagation loss. An improved method based on the continuous wavelet transform with Morlet wavelet is used to overcome detection problems associated to a low signal-to-noise ratio at the receiver. The average delay profile is used to detect the tag delay. Experimental measurements up to 5 m are obtained. © 2015 IEEE.
    Àrees temàtiques: Telecommunications Interdisciplinar Engineering, electrical & electronic Engenharias iv Electrical and electronic engineering Astronomia / física
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: antonioramon.lazaro@urv.cat david.girbau@urv.cat ramon.villarino@urv.cat
    Identificador de l'autor: 0000-0003-3160-5777 0000-0001-7995-5536 0000-0001-9692-8943
    Data d'alta del registre: 2024-10-26
    Versió de l'article dipositat: info:eu-repo/semantics/acceptedVersion
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Referència a l'article segons font original: Ieee Antennas And Wireless Propagation Letters. 15 618-621
    Referència de l'ítem segons les normes APA: Lazaro A; Ramos A; Girbau D; Villarino R (2016). Signal Processing Techniques for Chipless UWB RFID Thermal Threshold Detector Detection. Ieee Antennas And Wireless Propagation Letters, 15(), 618-621. DOI: 10.1109/LAWP.2015.2464680
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2016
    Tipus de publicació: Journal Publications
  • Paraules clau:

    Electrical and Electronic Engineering,Engineering, Electrical & Electronic,Telecommunications
    Wavelet transforms
    Ultrawideband (uwb)
    Ultra-wideband radio
    Ultra-wideband (uwb)
    Time domain analysis
    Threshold detectors
    Temperature sensors
    Temperature sensor
    Signal to noise ratio
    Signal receivers
    Signal processing technique
    Signal processing
    Signal detection
    Radio waves
    Radio frequency identification (rfid)
    Low signal-to-noise ratio
    Gain compensations
    Continuous wavelet transforms
    Continuous wavelet transform (cwt)
    Continuous wavelet transform
    Chipless
    Telecommunications
    Interdisciplinar
    Engineering, electrical & electronic
    Engenharias iv
    Electrical and electronic engineering
    Astronomia / física
  • Documents:

  • Cerca a google

    Search to google scholar