Improved Design of Sliding-Mode Controllers Based on the Requirements of MPPT Techniques

Identificador:  imarina:9285460

Handle: https://hdl.handle.net/20.500.11797/imarina9285460

Autors:  Montoya, DG; Ramos-Paja, CA; Giral, R

Resum:
In many grid-connected applications, a dc/dc switching converter is usually connected between the PV modules and the inverter. This paper presents an improved procedure to design a sliding controller for the PV system, which drives the PV voltage to follow a reference provided by an external MPPT algorithm and mitigates the perturbations caused by the irradiance changes and oscillations in the bulk voltage. By considering that the switching surface is the linear combination of the input capacitor current and the PV voltage error, the proposed design exhibits advantages in comparison with existing solutions that rely in the linearization of inner current loop dynamics. The proposed integral procedure, by taking also into account the effects in the closed-loop system dynamics of a reference filter, ensures a stable sliding regime in all the desired operation range of the system, while the settling time and overshoot of the PV voltage required by an MPPT algorithm are provided. Differently from a previous similar but less rigorous approach, the switching function and reference filter parameters are obtained by numerically solving a set of nonlinear equations. Simulations and experiments were used to demonstrate the efficiency of the proposed solution in presence of environmental and load perturbations. © 2015 IEEE.