Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Analysis of the degradation of highefficiency encapsulated PM6:Y7based Photovoltaic Cells

  • Dades identificatives

    Identificador: imarina:9385402
    Handle: https://hdl.handle.net/20.500.11797/imarina9385402
    Autors:
    Krolak, PatrycjaRamirez-Como, MagalyPallares-Marzal, JosepMarsal-Garvi, Lluis F
    Resum:
    In this work, we report a degradation study of high -efficiency conventional polymer solar cells (PSCs). The high performance of the PM6:Y7-based device is achieved with a power conversion efficiency (PCE) of up to 15.64% in the first measurement. The article describes the results of the measurements and analysis of the degradation process. The electrical parameters during the degradation process were extracted from the current density - voltage characteristics curves (J-V) under light and dark conditions. Were observed the specific parameters of the selected cells: open -circuit voltage (V OC ), short circuit current density (J SC ), fill factor (FF), PCE, series (R S ), and shunt (R SH ) resistance values The PCE of the device decreased down to 64% of the initial PCE after 1056 h.

  • Altres:

    Autor segons l'article: Krolak, Patrycja; Ramirez-Como, Magaly; Pallares-Marzal, Josep; Marsal-Garvi, Lluis F
    Departament: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/s de la URV: Marsal Garví, Luis Francisco / Pallarès Marzal, Josep
    Paraules clau: Degradation analysis Encapsulated cell No fullerenes acceptor Organic solar cells Pm6:y7
    Resum: In this work, we report a degradation study of high -efficiency conventional polymer solar cells (PSCs). The high performance of the PM6:Y7-based device is achieved with a power conversion efficiency (PCE) of up to 15.64% in the first measurement. The article describes the results of the measurements and analysis of the degradation process. The electrical parameters during the degradation process were extracted from the current density - voltage characteristics curves (J-V) under light and dark conditions. Were observed the specific parameters of the selected cells: open -circuit voltage (V OC ), short circuit current density (J SC ), fill factor (FF), PCE, series (R S ), and shunt (R SH ) resistance values The PCE of the device decreased down to 64% of the initial PCE after 1056 h.
    Àrees temàtiques: Ciências agrárias i Ciências ambientais Engenharias i Multidisciplinary sciences
    Accès a la llicència d'ús: https://creativecommons.org/licenses/by/3.0/es/
    Adreça de correu electrònic de l'autor: lluis.marsal@urv.cat josep.pallares@urv.cat
    Identificador de l'autor: 0000-0002-5976-1408 0000-0001-7221-5383
    Data d'alta del registre: 2024-10-12
    Versió de l'article dipositat: info:eu-repo/semantics/publishedVersion
    Referència a l'article segons font original: Tecnología En Marcha. 36 (6): 66 - 71
    Referència de l'ítem segons les normes APA: Krolak, Patrycja; Ramirez-Como, Magaly; Pallares-Marzal, Josep; Marsal-Garvi, Lluis F (2023). Analysis of the degradation of highefficiency encapsulated PM6:Y7based Photovoltaic Cells. Tecnología En Marcha, 36(6), 66 - 71. DOI: 10.18845/tm.v36i6.6765
    URL Document de llicència: https://repositori.urv.cat/ca/proteccio-de-dades/
    Entitat: Universitat Rovira i Virgili
    Any de publicació de la revista: 2023
    Tipus de publicació: Journal Publications

  • Paraules clau:

    Multidisciplinary Sciences
    Degradation analysis
    Encapsulated cell
    No fullerenes acceptor
    Organic solar cells
    Pm6:y7
    Ciências agrárias i
    Ciências ambientais
    Engenharias i
    Multidisciplinary sciences

  • Documents:

    DocumentPrincipal

  • Cerca a google

    Search to google scholar