Articles producció científicaEnginyeria Mecànica

Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation

  • Identification data

    Identifier:  imarina:9444393
    Authors:  Saluena-Berna, Xavier; Marin-Genesca, Marc; Rosas, Ramon Mujal; Arias, Manuel-Jose Lis
    Abstract:
    A new method is proposed to generate hydrogen in situ at low pressure from powder-pressed recycled aluminum turnings activated with small amounts of NaOH and drops of water. The contribution of this system is that the user can obtain small flows of high-purity hydrogen (>99%) to charge their portable electronic devices in remote places, in a simple, controlled, and safe way, since only water is used. Test tubes that contain tiny amounts of NaOH on their surface can be transported and used without contact. In addition to being a safer system, a smaller amount of NaOH and water is needed compared to other systems, there is no need to preheat the water, and the system can even generate heat. As the feeding is drop by drop, the hydrogen flow can be easily controlled by manual or automatic dosing. The waste obtained is solid and contains mostly aluminum hydroxide with some NaOH and impurities from the waste of origin, which are easy to sell and recycle. A study has been carried out to optimize the type of test tubes and establish critical parameters. The results show that a constant and controllable flow rate of hydrogen can be obtained depending on the drip frequency where the chemical reaction predominates over diffusion, that the optimal amount of NaOH is 20 wt%, that a finer grain size can increase the H-2 yield with respect to the stoichiometric value but reduces the instantaneous flow with respect to that obtained with larger grains, and that it is very important to control the density and the impurities to increase porosity and therefore water diffusion. The estimated cost of the hydrogen produced is 3.15 EUR/kgH(2) and an energy density of 1.12 kWh/kg was achieved with a test tube of 92% aluminum purity and 20 wt% NaOH.
  • Others:

    Link to the original source: https://www.mdpi.com/1996-1944/17/23/5885
    APA: Saluena-Berna, Xavier; Marin-Genesca, Marc; Rosas, Ramon Mujal; Arias, Manuel-Jose Lis (2024). Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation. Materials, 17(23), 5885-. DOI: 10.3390/ma17235885
    Paper original source: Materials. 17 (23): 5885-
    Article's DOI: 10.3390/ma17235885
    Journal publication year: 2024
    Entity: Universitat Rovira i Virgili
    Paper version: info:eu-repo/semantics/publishedVersion
    Record's date: 2025-02-24
    URV's Author/s: Marín Genescà, Marc
    Department: Enginyeria Mecànica
    Licence document URL: https://repositori.urv.cat/ca/proteccio-de-dades/
    Publication Type: Journal Publications
    Author, as appears in the article.: Saluena-Berna, Xavier; Marin-Genesca, Marc; Rosas, Ramon Mujal; Arias, Manuel-Jose Lis
    licence for use: https://creativecommons.org/licenses/by/3.0/es/
    Thematic Areas: Chemistry, physical, Condensed matter physics, Materials science (all), Materials science (miscellaneous), Materials science, multidisciplinary, Metallurgy & metallurgical engineering, Physics, applied, Physics, condensed matter
    Author's mail: marc.marin@urv.cat
  • Keywords:

    Al + naoh test tubes
    Al plus naoh test tube
    Aluminum breakage scrap
    Aluminum-water apparatus
    Aluminum-water reaction
    Aluminum–water apparatus
    Aluminum–water reaction
    Hydrogen generation
    Hydrogen reactor
    Portable hydrogen generation
    Sustained hydrogen
    Chemistry
    Physical
    Condensed Matter Physics
    Materials Science (Miscellaneous)
    Materials Science
    Multidisciplinary
    Metallurgy & Metallurgical Engineering
    Physics
    Applied
    Condensed Matter
    Materials science (all)
  • Documents:

  • Cerca a google

    Search to google scholar