Repositori URV

Identificador: imarina:9245508

Handle: https://hdl.handle.net/20.500.11797/imarina9245508

Autores:
Mandava, V. S. R.Herrero, JoanKopp, Gregory A.Giralt, Francesc

Resumen:
The turbulent flow in the wake of a discontinuous cylinder (DC) was investigated. The DC geometry consisted of cylinder segments 5D long (with D being the diameter of the cylinder) separated by gaps of width 2.5D. Particle image velocimetry and hot-wire anemometry were used to analyse the flow at two Reynolds numbers, Re = 4000 and 10000, for x/D <= 180. Large eddy simulations for both the DC and the infinite continuous cylinder (CC) wakes were also carried out at Re = 10000. The DC configuration was devised to trigger the shedding of horseshoe vortices (HSV) in the very-near-wake region with the intent of illustrating the role that these three-dimensional HSVs, previously identified in the far-wake region of CC, play in the entrainment process in turbulent wakes. The DC geometry produced HSVs by the interaction between the high momentum flow through the gaps and the main spanwise vortex shed behind each cylinder segment, while in the CC wake they evolve from near-wake instabilities straddled with hairpin vortices that detach spanwise vorticity from the shed Karman vortices. The DC wake was found to grow and spread in the transverse direction with a much faster rate than for the CC wake, up until approximately x/D approximate to 50. Prior to this location, the enhanced growth rate caused by the shear-aligned HSV led to a wake width of approximately 3 times that of the CC wake, with a maximum mean velocity deficit that was approximately half.