Autor según el artículo: Khalaf, Ayatallah M.; Issa, Hanady Hussien; Ramirez, Jose Luis; Mohamed, Shaimaa Ali;
Departamento: Enginyeria Electrònica, Elèctrica i Automàtica
Autor/es de la URV: Ramírez Falo, José Luis
Palabras clave: Thermistor Temperature sensor Pss Pedot Inkjet printer Agnp
Resumen: This paper develops a simple, cost-effective, fully Inkjet-printed flexible temperature sensor with easy fabrication steps using PiXDRO LP50 inkjet printer. The thermistor sensor employed a Poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT: PSS) as a temperature-sensitive layer with silver nanoparticles (AgNps) as a contact electrode. The sensor performance was evaluated on different dimensions and types of substrates. Epson Glossy paper with 255 mu m thickness and Polyimide (Kapton HN) with 50 mu m thickness were used over temperatures ranging from room temperature up to 50 degrees C and 90 degrees C for paper and Kapton substrates, respectively. The sensor developed over Glossy paper showed the best sensitivity of 1.67 %/degrees C in the chosen temperature range while the sensor showed C0.113%/degrees C on PI substrate.
Áreas temáticas: Telecommunications Materials science (miscellaneous) Materials science (all) General materials science General engineering General computer science Engineering, electrical & electronic Engineering (miscellaneous) Engineering (all) Engenharias iv Engenharias iii Electrical and electronic engineering Computer science, information systems Computer science (miscellaneous) Computer science (all) Ciência da computação
Acceso a la licencia de uso: https://creativecommons.org/licenses/by/3.0/es/
Direcció de correo del autor: joseluis.ramirez@urv.cat
Identificador del autor: 0000-0001-8231-4019
Fecha de alta del registro: 2024-09-07
Versión del articulo depositado: info:eu-repo/semantics/publishedVersion
Enlace a la fuente original: https://ieeexplore.ieee.org/document/9779773
URL Documento de licencia: https://repositori.urv.cat/ca/proteccio-de-dades/
Referencia al articulo segun fuente origial: Ieee Access. 10 61094-61100
Referencia de l'ítem segons les normes APA: Khalaf, Ayatallah M.; Issa, Hanady Hussien; Ramirez, Jose Luis; Mohamed, Shaimaa Ali; (2022). All Inkjet-Printed Temperature Sensors Based on PEDOT:PSS. Ieee Access, 10(), 61094-61100. DOI: 10.1109/ACCESS.2022.3176822
DOI del artículo: 10.1109/ACCESS.2022.3176822
Entidad: Universitat Rovira i Virgili
Año de publicación de la revista: 2022
Tipo de publicación: Journal Publications