Development of Flexible Gas Sensors Based on Additive Fabrication Processes

Identificador:  TDX:3079

Handle: https://hdl.handle.net/20.500.11797/TDX3079

Autores:  Alvarado Pérez, Miriam

Resumen:
Gas sensors are used to monitor indoor and outdoor environments. Some common applications are to measure: the level of pollutants in the streets, the gases liberated by industrial and car exhausts, gases in mining, blood alcohol content through the exhaled breath, etc. As the field of application for gas sensors is growing, it becomes necessary to adapt the gas sensors to our daily devices and belongings. This requires mechanically flexible and resistant materials to fabricate the flexible gas sensors. In addition to gas sensing tests, the resistance to bending of the sensors should be tested to call a sensor flexible. The main objective of this thesis is to fabricate flexible gas sensors through additive processes using metal oxides as sensitive materials. The flexible gas sensors were fabricated using a flexible polymeric substrate (Kapton). The different processes employed were compatible with the temperature of the operating temperature of the substrate. Among the techniques employed are stencil, screen-printing, inkjet-printing, AA-CVD. Also, surface processes were performed to improve the adhesion of the metal oxides to the polymeric substrate. The flexibility of the sensors was tested by performing a cyclical bending test.