Compact tubular carbon-based membrane bioreactors for the anaerobic decolorization of azo dyes

Identificador:  imarina:9326643

Handle: https://hdl.handle.net/20.500.11797/imarina9326643

Autors:  Amin, Mohammad Shaiful Alam; Stuber, Frank; Giralt, Jaume; Fortuny, Agusti; Fabregat, Azael; Font, Josep

Resum:
This research investigates a highly efficient compact tubular ceramic-supported carbon-based membrane reactor integrated with anaerobic biodegradation to decolorize the azo dyes. Two carbon-based membranes, produced using Matrimid 5218 polyimide and graphene oxide solutions, are evaluated for the comparative color removal of three structurally different azo dyes, Acid Orange 7 (AO7), Reactive Black 5 (RB5), and Direct Blue 71 (DB71). Based on FESEM microscopic images, the average pore size of the tubular ceramic-supported carbonized membrane (TCSCM) was approximately 25 nm, while for the tubular ceramic-supported graphene oxide membrane (TCSGOM), it was 12 nm. Additionally, TCSCM had a thinner layer at only 1.10 µm, while TCSGOM was slightly thicker at 2.11 µm. These features influenced the permeate flux of the membrane, in which the TCSGOM exhibited lower permeate flux (18.2 L·m−2·h−1) than the TCSCM (45.6 L·m−2·h−1). However, the anaerobic decolorization results indicated that the TCSGOM bioreactor (B-TCSGOM) was more efficient and effective at removing color from all dye solutions than the TCSCM bioreactor (B-TCSCM) over a wide range of feed concentrations. In both reactors, the highest decolorization was achieved at low feed concentration (50 mg·L−1), and removal was 94 % for AO7, 90 % for RB5, and 88 % for DB71 in B-TCSGOM, whereas 88 %, 85 %, and 69 %, respectively, in B-TCSCM. These suggest that the robust conductive nanoporous surface of B-TCSGOM makes it more effective at removing different azo dye solutions from wastewater.