Articles producció científica> Enginyeria Electrònica, Elèctrica i Automàtica

Interleaved Digital Power Factor Correction Based on the Sliding-Mode Approach

  • Datos identificativos

    Identificador: PC:1468
    Handle: https://hdl.handle.net/20.500.11797/PC1468
    Autores:
    Enric Vidal-IdiarteAdria Marcos-PastorAngel Cid-PastorL. Martinez-Salamero
    Resumen:
    This study describes a digitally controlled power factor correction (PFC) system based on two interleaved boost converters operating with pulsewidth modulation (PWM). Both converters are independently controlled by an inner control loop based on a discrete-time sliding-mode (SM) approach that imposes loss-free resistor (LFR) behavior on each cell. The switching surface implements an average current-mode controller so that the power factor (PF) is high. The SM-based digital controller is designed to operate at a constant switching frequency so that the interleaving technique, which is recommended for ac-dc power conversion systems higher than 1 kW, can be readily applied. An outer loop regulates the output voltage by means of a discrete-time proportional-integral (PI) compensator directly obtained from a discrete-time small-signal model of the ideal sliding dynamics. The control law proposed has been validated using numerical simulations and experimental results in a 2-kW prototype.

  • Otros:

    Autor según el artículo: Enric Vidal-Idiarte; Adria Marcos-Pastor; Angel Cid-Pastor; L. Martinez-Salamero
    Departamento: Enginyeria Electrònica, Elèctrica i Automàtica
    Autor/es de la URV: VIDAL IDIARTE, ENRIC; Adria Marcos-Pastor; CID PASTOR, ANGEL; MARTÍNEZ SALAMERO, LUIS
    Palabras clave: Engineering controlled terms AC-DC power conversion power factor correction
    Resumen: This study describes a digitally controlled power factor correction (PFC) system based on two interleaved boost converters operating with pulsewidth modulation (PWM). Both converters are independently controlled by an inner control loop based on a discrete-time sliding-mode (SM) approach that imposes loss-free resistor (LFR) behavior on each cell. The switching surface implements an average current-mode controller so that the power factor (PF) is high. The SM-based digital controller is designed to operate at a constant switching frequency so that the interleaving technique, which is recommended for ac-dc power conversion systems higher than 1 kW, can be readily applied. An outer loop regulates the output voltage by means of a discrete-time proportional-integral (PI) compensator directly obtained from a discrete-time small-signal model of the ideal sliding dynamics. The control law proposed has been validated using numerical simulations and experimental results in a 2-kW prototype.
    Grupo de investigación: Grup d'Automàtica i Electrònica Industrial
    Áreas temáticas: Enginyeria electrònica Ingeniería electrónica Electronic engineering
    Acceso a la licencia de uso: https://creativecommons.org/licenses/by/3.0/es/
    ISSN: 0885-8993
    Identificador del autor: 0000-0002-6016-4096; n/a; 0000-0001-8124-6210; n/a
    Fecha de alta del registro: 2016-05-02
    Página final: 4653
    Volumen de revista: 31
    Versión del articulo depositado: info:eu-repo/semantics/acceptedVersion
    URL Documento de licencia: https://repositori.urv.cat/ca/proteccio-de-dades/
    Entidad: Universitat Rovira i Virgili
    Año de publicación de la revista: 2016
    Página inicial: 4641
    Tipo de publicación: Article Artículo Article

  • Palabras clave:

    Convertidors de corrent elèctric
    Electrònica de potència
    Engineering controlled terms
    AC-DC power conversion
    power factor correction
    Enginyeria electrònica
    Ingeniería electrónica
    Electronic engineering
    0885-8993

  • Documentos:

    DocumentPrincipal

  • Cerca a google

    Search to google scholar